Didamx 325Pcs 304 Stainless Steel External C-Clips Shaft Circlip Retaining Snap Ring Assortment Set

Didamx 325Pcs 304 Stainless Steel External C-Clips Shaft

325Pcs 304 Stainless Steel External C-Clips Shaft Circlip Retaining Snap Ring Assortment Set Specifications Product Name: C-Clip Circlip Material: 304 Stainless Steel Sizes: 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm,24mm, 26mm, 28mm Package Quantity: Total 325Pcs Package Included 4mm .................................................................. 30pcs 5mm .................................................................. 30pcs 6mm .................................................................. 30pcs 7mm .................................................................. 30pcs 8mm .................................................................. 30pcs 10mm ................................................................. 30pcs 12mm ................................................................. 20pcs 14mm ................................................................. 20pcs 16mm ................................................................. 20pcs 18mm ................................................................. 20pcs 20mm ................................................................. 20pcs 22mm ................................................................. 15pcs 24mm ..............................................

  • Brand: Didamx
  • ASIN: B07FFKFZG1
  • UPC: 600984613458

Crescent External Retaining Ring, Tapered Section, Radial Assembly, 1060-1090 Carbon Steel, Zinc Yellow Chromate Plated Finish, 3/4" Shaft Diameter, 0.042" Thick, Made in US (Pack of 25)

Crescent External Retaining Ring, Tapered Section, Radial Assembly,

The crescent external retaining ring has a tapered section, assembles radially, is made of zinc yellow chromate plated 1060-1090 carbon steel, and is made in USA. The ring's crescent shape creates a low-profile shoulder and is recommended for applications where clearance is at a minimum. The tapered section style provides the ring with flexibility to facilitate installation and typically withstands higher thrust loads than constant section and spiral rings. The ring installs by sliding it onto a shaft from the side, also called radial assembly. Often used when the shaft end is not reachable, radial assembly rings enable quicker installation than axially installed rings but may require deeper grooves. The 1060-1090 carbon steel is often used in applications where strength is the primary consideration, and the zinc yellow chromate plating offers good corrosion resistance.Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement. Retaining rings should fit tightly enough into the...

  • Brand: Small Parts
  • ASIN: B0062OF8DM

Neiko 50458A Snap Ring Shop Assortment, 300 Count | 18 Sizes (1/8" - 1-1/4") | Hardened Steel

Neiko 50458A Snap Ring Shop Assortment, 300 Count

Comes with the most commonly used sizes: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 15/32", 1/2", 9/16", 5/8", 3/4", 13/16", 7/8", 1", 1-1/16", 1-1/8", 1-1/4".

  • Brand: Neiko
  • ASIN: B000K7GREQ
  • UPC: 837013504580

Ochoos 300PCS M2- M22 Circlips for Shaft E Type cir Clip Assorted kit Steel Shaft retaining Ring Bearing Retainer circlip Washers

Ochoos 300PCS M2- M22 Circlips for Shaft E

Note:Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.Item specifics:Model number: 300PCSIs customized: YesDiy supplies: Electrical

  • Brand: Ochoos
  • ASIN: B07MXP7RBD
  • UPC: 730921244244

Standard External Retaining Ring, Tapered Section, Axial Assembly, PH15-7 Stainless Steel, Passivated Finish, 3/4" Shaft Diameter, 0.042" Thick, Made in US (Pack of 10)

Standard External Retaining Ring, Tapered Section, Axial Assembly,

Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement. Retaining rings should fit tightly enough into the groove or onto the shaft so they won't experience any movement.

  • Brand: Small Parts
  • ASIN: B00761MGOO

SPEEDWOX 11 Inches Lock Ring Pliers Special Retaining Ring Pliers for Removing Installing Gearshift Locking Rings Angle Tip Circlip Plier Automobile Transmission Clutch Shafts Tool

SPEEDWOX 11 Inches Lock Ring Pliers Special Retaining

SPECIFICATION Material: Chrome Vanadium Steel Handle: Plastic-coated Surface Treatment: Black Oxide Finish Body Hardness: 48-50 HRC Dimension: 285 x 110 x 16 mm ABOUT SPEEDWOX Founded in 1958, now employs over 800 staff and covers an area of nearly 238,000 square meters. We are specialized in manufacturing all kinds of pliers, shears and other hand tools. CAUTION 1. Please keep out of children. 2. Some oil on the surface to keep pliers free of rust, it will not affect the performance just wipe it clean with a rag or old towel.

  • Color: Red
  • Brand: SPEEDWOX
  • ASIN: B07QYR719L
  • UPC: 754970487612

Glarks 4Pcs 7-Inch Internal/External Circlip Plier Snap Ring Pliers with 4Pcs Precision Pick and Hook Set for Ring Remover Retaining and Remove Hoses, Gaskets

Glarks 4Pcs 7-Inch Internal/External Circlip Plier Snap Ring

Glarks 4Pcs 7-Inch Internal/External Circlip Plier Snap Ring Pliers with 4Pcs Precision Pick and Hook Set for Ring Remover Retaining and Remove Hoses, Gaskets Specification: The tip diameter is 1.7mm/0.07" Bent tip max open is 3cm/1.2'' Straight tip max open is 3.8cm/1.5'' Tips material: Carbon steel, black oxide finished Handle material: TPR plastic Professional Circlip Pliers Set: ☛ Made of forged and hardened carbon steel, CR-V steel construction provides enhanced durability and extended life. ☛ Self-opening spring-loaded handles and TPR plastic handle provide comfortable use. ☛ 4 type of hook for pulling clips rings wires gaskets washers and other small parts. ☛ Perfect for removes and installs externally placed retaining rings. Package Include: 1 x 7-inch straight tip internal circlip pliers 1 x 7-inch straight tip external circlip pliers 1 x 7-inch bent tip internal circlip pliers 1 x 7-inch bent tip external circlip pliers 1 x Full hook 1 x 90-degree hook 1 x 45-degree hook 1 x Straight pick 1 x high quality leather bag Note: ♥ Please check the specific size of the product according to the second picture. ♥ Choose Us: We provide quality assurance. If you receive a defective product or have any problems during use, please feel free to contact us, we will prov...

  • Brand: Glarks
  • ASIN: B07S2XDXR1

Snap-Ring Pliers (Circlip Pliers), for Large Internal Circlips (Retaining Ring) - Size of Shaft 4.8-11.8 Inch

Snap-Ring Pliers (Circlip Pliers), for Large Internal Circlips

- For assembling circlips in bore holes within the range of ø 122 - 300 mm (similar to 4.8 - 11.8 inch) - For easy fitting of internal snap rings - Pliers with straight tips - Even more power for easier working - With locking device, can be released - Solid and forged style - With replaceable tips made of tempered steel - Black powder coated - Pliers body: rolled steel, high-strength - Tips: special tool steel, rolled, oil-hardened Made in Germany by Rennsteig

  • Brand: Rennsteig
  • ASIN: B00BCXZGZI

E-Style External Retaining Ring, Tapered Section, Radial Assembly, SAE 1060-1090 Carbon Steel, Zinc Yellow Chromate Plated Finish, 5/8" Shaft Diameter, 0.042" Thick, Made in US (Pack of 50)

E-Style External Retaining Ring, Tapered Section, Radial Assembly,

Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement. Retaining rings should fit tightly enough into the groove or onto the shaft so they won't experience any movement.

  • Brand: Small Parts
  • ASIN: B0062OFG1G

E-Style External Retaining Rings,Retaining Rings for Shafts,E-Clips Assortment Kit,Stainless Steel

E-Style External Retaining Rings,Retaining Rings for Shafts,E-Clips Assortment

Snap rings directly into the groove from the side of the shaft. The three prongs come in contact with the bottom of the groove and provide a shoulder to effectively retain assemblies.Metric stainless steel rings are made of stainless steelProduct Detail:Φ1.5mm: 20 piecesΦ2.0mm: 20 piecesΦ3.0mm: 20 piecesΦ4.0mm: 20 piecesΦ5.0mm: 20 piecesΦ6.0mm: 20 piecesΦ7.0mm: 20 piecesΦ8.0mm: 20 piecesΦ9.0mm: 20 piecesΦ10.0mm: 20 pieces

  • Color: Silver
  • Brand: Huzstar
  • ASIN: B075JDGJ8N
  • UPC: 611677702915

Standard External Retaining Ring, Tapered Section, Axial Assembly, SAE 1060-1090 Carbon Steel, Phosphate and Oil Finish, Meets DIN 471 Specifications, 4mm Shaft Diameter, 0.40mm Thick, Made in US (Pack of 100)

Standard External Retaining Ring, Tapered Section, Axial Assembly,

Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement. Retaining rings should fit tightly enough into the groove or onto the shaft so they won't experience any movement.

  • Brand: Small Parts
  • ASIN: B0062OEFNQ

External Retaining Ring, 172 Copper, Inch, 3/16" Shaft Diameter, 0.015" Thick, Pack of 100

External Retaining Ring, 172 Copper, Inch, 3/16" Shaft

Useful in many machine assemblies, Retaining Rings provide an artificial shoulder for accurately locating, retaining or locking components in position, replacing nuts, threaded sleeves, cotter pins, rivets, machined shoulders and other bulkier fittings.The tapered design maintains circularity and pressure against grooves. They are axially applied and can be removed with Retaining Ring Pliers. The RE series is Carbon Steel with a Zinc Plated finish, except RE-2 and RE-3 which are Beryllium Copper.

  • Color: Copper
  • Brand: Small Parts
  • ASIN: B000NBD26A

Poodle External Retaining Ring, Tapered Section, Radial Assembly, 1060-1090 Carbon Steel, Phosphate Finish, 3/16" Shaft Diameter, 0.035" Thick, Made in US (Pack of 100)

Poodle External Retaining Ring, Tapered Section, Radial Assembly,

The poodle external retaining ring has a tapered section, assembles radially, is made of phosphate finished 1060-1090 carbon steel, and is made in USA. The ring's poodle shape has two large panels that provide a large shoulder area on opposite sides of the shaft for assembly retention. The tapered section style provides the ring with flexibility to facilitate installation and typically withstands higher thrust loads than constant section and spiral rings. The ring installs by sliding it onto a shaft from the side, also called radial assembly. Often used when the shaft end is not reachable, radial assembly rings enable quicker installation than axially installed rings but may require deeper grooves. The 1060-1090 carbon steel is often used in applications where strength is the primary consideration, and the phosphate finish provides mild corrosion resistance.Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement. Retaining rings should fit tightly enough into the groove or o...

  • Brand: Small Parts
  • ASIN: B0062O8ZB4
  • UPC: 848790019884

Reinforced External Retaining Ring, Tapered Section, Axial Assembly, 1060-1090 Carbon Steel, Phosphate Finish, 2" Shaft Diameter, 0.125" Thick, Made in US (Pack of 5)

Reinforced External Retaining Ring, Tapered Section, Axial Assembly,

The reinforced external retaining ring has a tapered section, assembles axially, is made of phosphate finished 1060-1090 carbon steel, and is made in USA. The ring has a reinforced standard round shape with a lug hole on each end for installing onto the shaft with a tool. The ends pry apart with the installation tool and snap back towards each other when installed on the shaft for a tight grip. The tapered section style provides the ring with flexibility to facilitate installation and typically withstands higher thrust loads than constant section and spiral rings. The ring installs by sliding onto a shaft from the end, also called axial assembly. Axially installed rings reach further around the outside diameter of the shaft than radially installed rings. The 1060-1090 carbon steel is often used in applications where strength is the primary consideration, and the phosphate finish provides mild corrosion resistance.Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly. While most rings install into a machined groove either on the inside or outside diameter of a shaft, self-locking rings attach to a shaft by using friction from means such as teeth and notches to maintain placement. Retai...

  • Brand: Small Parts
  • ASIN: B0062OBT6M

Knipex 4510170 Special Rings Retaining Ring Pliers 6.75-Inch

Knipex 4510170 Special Rings Retaining Ring Pliers

For fitting horseshoe-shaped spring retaining rings and circles without grip holes. For shaft retaining devices. With opening spring. Chrome vanadium electric steel, forged, oil-hardened.

  • Brand: KNIPEX Tools
  • ASIN: B003UHUCQM
  • UPC: 843221004781
Similar Retaining Ring Shaft Results