Pepetools Ultra Series 110MM Combination Rolling Mill

Pepetools Ultra Series 110MM Combination Rolling

Introducing the world's best known rolling mill, the "ultra" series line of rolling Mills by Pepe tools. pepetools engineered a unique housing that maximizes durability and increases strength, all while decreasing overall mass. Thanks to a new generation of precision machining, pepetools "ultra" series rolling Mills are stronger than ever. Frames are fashioned from high strength iron so that the total weight of each mill could be reduced to save on shipping costs. Standard on each mill is a high performance 4:1 reduction gear box turned with a high strength forged steel handle. Gears are not cast but are hobbled from solid steel. Each roll is precision machined from select grades of high density steel. After the machining process is completed, each roll is hardened to 65 hrs. in strategic locations utilizing the latest in induction heat treating methods made in USA rolling mill comes with a 12 month limited factory warranty. Don't miss the opportunity to have this item in your shop. The Half-Round grooves are machined into the upper roll and are used to form Half-Round wire often used to fabricate ring shanks. The 4 square grooves form wire into a profile that is roughly square in profile. Wire so formed is then passed through a drawplate to create round wire or other wire profil...

  • Brand: Pepe Tools
  • ASIN: B01LVYWSFD
  • UPC: 014891132054

PepeTools Combination Rolling Mill 130 mm Wide Rollers, Ultra Series Made in USA

PepeTools Combination Rolling Mill 130 mm Wide Rollers,

Pepe Tools newest family of Rolling Mills, The Ultra Series, made in Oklahoma City, Ok. USA are redesigned for Jewelers and Crafts-people. This series is 30 to 50 percent the weight of Casted Rolling Mills, made from precision steel for ultra strength and durability. Rolling Mills are designed for cold rolling metal to produce thinner gauges of sheet metal and wire, transferring textures to your metal and to make the thickness uniform. Pepe Tools reduction gear ratio of 4:1 allows the rollers to make one complete turn for every four turns of the rolling mill handle. This relieves the amount of force needed to operate the rolling mill. The "T" bar at the top of the Rolling Mill is used to open or close the rollers. When completely closed the rollers , should measure "true" cylindrically. This means they should touch with no visible gaps. Should there ever be a gap, meaning the rollers are not "true", simply remove the two small screws holding the "T" bar cover , pull the "T" bar handle off and turn the large gears to move the roller(s) down until there is no visible gap, making them "true", then re-install the "T" bar and cover. Made in USA, available through Jeweler's Supermarket The rollers are: Combination Roller Square wire(mm):1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5 ; Combinat...

  • Brand: Ultra
  • ASIN: B01C7QC0QQ
  • UPC: 730792704014

Mophorn Jewelry Rolling Mill Combination Rolling Mill 120mm Wide 55mm Diameter Rollers Manual Rolling Mill Machine Jewelry Marking Tools for Jewelers and Crafts-People

Mophorn Jewelry Rolling Mill Combination Rolling Mill 120mm

Manual Combination Rolling Mill Machine 120mm Wide 55mm Diameter Rollers Jewelry Marking Tools The manual combination rolling mill, with 120mm wide 55mm diameter rollers, features maximum 5 mm opening, is designed for jewelers and crafts-people. Feature: The rolling mill machine is made from precision steel for ultra strength and durability Simple and convenient to use. Easily mounts the rolling mill to your workbench using the mounting holes Reduction gear ratio of 4:1 allows the rollers to make one complete turn for every four turns of the rolling mill handle. Main Parament: Roller gross length: 120 mm (4.72 inch) Roller diameter: 55 mm (2.17 inch) Roller width left up: 85 mm (3.35 inch) Middle roller width: 45 mm (1.77 inch) Maximum opening: 0-5 mm (0-0.2 inch) Square wire(+/- 0.01mm): 2, 2.5, 3, 3.5, 4, 5, 6 Ring shank - half round ellipse(mm): 2, 3, 4, 5, 6, 8 Produce metal foil as thin as .001 inch Package size: 33x31x26 cm (13x12x10 inch) Package Content 1 x Combination Rolling Mill 1 x Handle

  • Color: 120mm
  • Brand: Mophorn
  • ASIN: B07MNLX7VX

Manual Rolling Mill Machine, Combination Rolling Mill Jewelry Press Tabletting Tool Machine 85mm for Jewelry Design & Repair (US Stock)

Manual Rolling Mill Machine, Combination Rolling Mill Jewelry

Technical Specifications: Color: Green Type: Rolling Mill Item Type: Jewelry Tools & Equipments Material: Stainless alloy Roller Width left up: 85mm Middle Roller width: 50mm Maximum opening: 0-5mm Square wire (+/-0.01mm): 1,1.5, 2, 2.5, 3, 4, 6 Round wire (+/-0.01mm): 2,3,4,5,6,8 Combination Round lengthshape: 120(mm) Round Diameter: 60(mm) Features and Benefits: Rollers are easy to change for different applications, ideal for drawing wire right in your own home; The outer 3 mm of the rolls are hardened to around 60 HRC for superior deformation resistance; True gear reduction with easily turned short handles; Rolls made from stainless alloy that offers good wear resistance; All powder coated for superior corrosion protection and appearance Notice: 1. Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid. 2. The color may have different as the difference display,pls understand. Package Contents: 1 x Rolling mill machine

  • Brand: GDAE10
  • ASIN: B07G7ZCCSZ

Ultima Euro Pro Series Rolling Mill with Four Rollers I1708A

Ultima Euro Pro Series Rolling Mill with Four

The Ultima Euro Pro Series Rolling Mill for rolling out wire and sheet metal from 0.45mm to 3.75mm in thickness. The Reduction Gear is 4 to 1 meaning you rotate the handle four complete turns in order for the rollers to complete a single rotation. The Rockwell Hardness (HRC) is 55, Rolling Mills are one of the common basic tools for jewelry making. The rolling mill comes in grease to protect it and tightly packed in shreaded newspaper, with the plain rollers inserted in the machine and the wire rollers and handle disassembled and in separate boxes. There is a wrench and a hex key attached to these separate boxes. Some assembly is required and you will need to maintain the roller by keeping it covered, the gears and rollers oiled and clean. Remember when rolling sheet metal to always anneal, clean and dry your metal. This machine comes with Flat and Wire rollers meaning you may combine a flat with a wire roller.

  • Brand: Ultima
  • ASIN: B07HPFG88T
  • UPC: 730792705622

Pepetools 187.00A 90mm Ultra Series Flat Rolling Mill, 3.5"

Pepetools 187.00A 90mm Ultra Series Flat Rolling Mill,

Pepetools, the world's foremost manufacturer of tools and equipment for Jewelers, is proud to introduce an all new series family of rolling Mills, the ultra series, made in Oklahoma city, OK. USA are redesigned for Jewelers and crafts-people. This series is made from precision steel for ultra strength and durability. Rolling Mills are designed for cold rolling metal to produce thinner gauges of sheet metal and wire, transferring textures to your metal and to make the thickness uniform. Pepe tools reduction gear ratio of 4:1 allows the rollers to make one complete turn for every four turns of the rolling mill handle. This relieves the amount of force needed to operate the rolling mill. The "T" bar at the top of the rolling mill is used to open or close the rollers. When completely Closed the rollers , should measure "true" cylindrically. This means they should touch with no visible gaps. Should there ever be a gap, meaning the rollers are not "true", simply remove the two small screws holding the "T" bar cover , pull the "T" bar handle off and turn the large gears to move the roller) down until there is no visible gap, making them "true", then re-install the "T" bar and cover. Made in USA

  • Brand: Pepe Tools
  • ASIN: B01JSQX4PY
  • UPC: 014891132023

PepeTools Combination Rolling Mill Ultra With 90 mm Wide Rollers, Made In USA

PepeTools Combination Rolling Mill Ultra With 90 mm

Pepe Tools newest family of Rolling Mills, The Ultra Series, made in Oklahoma City, Ok. USA are redesigned for Jewelers and Crafts-people. This series is 30 to 50 percent the weight of Casted Rolling Mills, made from precision steel for ultra strength and durability. Rolling Mills are designed for cold rolling metal to produce thinner gauges of sheet metal and wire, transferring textures to your metal and to make the thickness uniform. Pepe Tools reduction gear ratio of 4:1 allows the rollers to make one complete turn for every four turns of the rolling mill handle. This relieves the amount of force needed to operate the rolling mill. The "T" bar at the top of the Rolling Mill is used to open or close the rollers. When completely closed the rollers , should measure "true" cylindrically. This means they should touch with no visible gaps. Should there ever be a gap, meaning the rollers are not "true", simply remove the two small screws holding the "T" bar cover , pull the "T" bar handle off and turn the large gears to move the roller(s) down until there is no visible gap, making them "true", then re-install the "T" bar and cover. Made in USA, available through Jeweler's Supermarket

  • Brand: Pepe Tools
  • ASIN: B01C6IU86Y
  • UPC: 730792703970

Manual Rolling Mill Machine,85mm Jewelry Press Tabletting Roller Drawing Handle Stainless Reducing Thickness of Sheet Jewelry Tool

Manual Rolling Mill Machine,85mm Jewelry Press Tabletting Roller

Features and Benefits: Rollers are easy to change for different applications, ideal for drawing wire right in your own home. The outer 3 mm of the rolls are hardened to around 60 HRC for superior deformation resistance. True gear reduction with easily turned short handles. Rolls made from stainless alloy that offers good wear resistance, All powder coated for superior corrosion protection and appearance. Specification: Color: Green Type: Rolling Mill Item Type: Jewelry Tools Equipments Material: Stainless alloy Roller Width left up: 85 mm Middle Roller width: 50 mm

  • Brand: SHZICMY
  • ASIN: B07GB8GN7M

Compact Rolling Mill Machine Basic 3" (80mm) with 2 Rollers Assembled Flat & Wire Jewelry Press Tabletting DIY Tool

Compact Rolling Mill Machine Basic 3" (80mm) with

3" (80 mm) Rolling Mill MachineJewelry Tools - FlatAccessories: 1 Rolling Mill Machine (2 rollers assembled), 1 Handle, 1 Roller Adjustment Screw The Rolling Mill Machine is designed to meet the needs of Jewelers and metal smith. It is compact, economical, and cost effective. Rollers are hardened approx. 60 HRC for superior deformation resistance. For mounting 2 bolting holes are provided in the base of rolling mill. It is well designed and high grade steel is used to manufacture all its components. Product Specification2 Rollers : 1 Roller is Flat and V Groove and 1 Roller is ½ Round, Flat& V Grooves.Upper Roller bifurcations : 22 mm V grove and rest flatLower Rollers bifurcation : 22 mm V grove, 27mm Flat and 22 mm Half RoundGear Ratio : 3.15:1Maximum Opening : 4mmSquare Wire (+/- 0.01 mm) : 0.75 to 5.75 mmRound Wire (+/- 0.01 mm) : 0.75 to 5.75 mmMaximum Aperture of Rolls : 4 mmMax. Sheet Width : 27 mmOverall Machine Dimension : 230 X 200 X 300mmGross Weight of Machine : 17.3 Kg.

  • Brand: Simond Store
  • ASIN: B0751L3BHD
  • UPC: 816183023008

Rolling Mill Machine 3" (80mm) with 5 Rollers

Rolling Mill Machine 3" (80mm) with 5

3" (80 mm) Rolling Mill Machine with 5 Metal Roller Jewelry Tools - Flat, Pattern, WireAccessories: 1 Rolling Mill Machine (2 rollers assembled), 3 Extra Metal Roller, 1 Handle, 1 Roller Adjustment Screw The Rolling Mill Machine is designed to meet the needs of Jewelers and metal smith. It is compact, economical, and cost effective. Rollers are hardened approx. 60 HRC for superior deformation resistance. For mounting 2 bolting holes are provided in the base of rolling mill. CharacteristicsRollers are made of high density carbon steel.Rollers are polished to a mirror shine.Reasonable Structure for long life use.Excellent Gear ratio hence less effort to operate.Well design and precision machined steel Components and Gear.Used for Gold making, Coin making and other metals Jewelry making.It can perform variety of tasks including Sheet, wire, half round and V-shape.Accurate workmanship and simple Operation.Work steadily and less noise. Product Specification5 Rollers - 2 Flat, 2 Patterns, 1 roller with half round and V groove.Rollers Width and Diameters - 3’’ X 1.6’’ (76 X 41 mm)Gear Ratio - 3.15 : 1Depth Per Rotation of Starting - 0.86 mmMaximum Sheet Thickness - 4 mmWire Sizes - 0.75 To 5.75 mmRollers Makes - Flat, 1/2 Round, V shapesOverall Machine Dimension - 220 X 190 X 3...

  • Brand: Simond Store
  • ASIN: B0751JDQZ7
  • UPC: 816183023015
Similar Rolling Mills Results