RPM Oversized Rear Axle Carriers: X-Maxx, RPM81732

RPM Oversized Rear Axle Carriers: X-Maxx,

Overview RPM Oversized Rear Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of these massive beasts. The first being durability. We designed these carriers to handle some serious abuse. RPM Oversized Axle Carriers are BEEFY, with massive support ribs for the strongest possible carriers available.The other area of improvement comes in the form of larger inner bearings. How large? MASSIVE! The stock inner bearings are a mere 20x27x4mm. The oversized bearings we use are gigantic 20x32x7mm bearings! That's 5mm larger on the diameter and 3mm on the width! That equates to a dynamic load rating that is nearly 300% higher than the stock bearing while the static load rating is over 300% higher! The differences are so dramatic you'll wonder why these didn't come stock.If you've ever blown a stock rear bearing or broken a stock rear axle carrier, you need to check these out! Our Oversized Rear Axle Carriers are molded in black and backed by our limited lifetime warranty against breakage. You can't go wrong with RPM parts on your X-Maxx.Tech Notes: RPM Oversized Rear Axle Carriers replace stock Traxxas #7752. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are s...

  • Brand: RPM
  • ASIN: B01LE0P20M
  • UPC: 672415817322

RPM Threaded Hinge Pins: TRA X-Maxx, RPM70510

RPM Threaded Hinge Pins: TRA X-Maxx,

This is an optional RPM Threaded Hinge Pin Set for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you've lost or damaged your stock hinge pins, or perhaps you're tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back!Tech Notes:RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer A-arm hinge pin location. Each kit comes with 4 - threaded hinge pins and 4 - M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information).

  • Brand: RPM
  • ASIN: B07K7TZPNK
  • UPC: 672415705100

RPM Traxxas X-Maxx Front & Rear Upper & Lower A-arm Black

RPM Traxxas X-Maxx Front & Rear Upper &

RPM Traxxas X-Maxx Upper & Lower A-Arms were developed to handle the weight and the punishment the massive X-Maxx trucks can dish out. Starting with the upper A-arm, RPM used their proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it! The lower A-arm has better ground clearance than stock A-arms and has a cross section based off of the proven RPM 1:5 scale HPI Baja A-arms so you know they're tough! They also created a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won't force you into the "walk of shame". They're also universal fit, which means they'll fit on any corner of your truck!RPM X-Maxx A-arms are molded in RPM's trademark blend of incredibly tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by their industry-leading limited lifetime warranty against breakage for worry-free performance you can count on! NOTE:Each package comes with one upper and one lower A-arm. Four packages will be needed to complete one full vehicle. Features: Stronger than stock Lighter than stock Sold with 1 - upper and 1 - lower a-arm in each package 4 packages needed per vehicle Replaces the upper a-arm from stock Traxxas TRA7729 Replac...

  • Brand: RPM R/C Products
  • ASIN: B01GKAPQFM
  • UPC: 672415823521

RPM Rear Bulkheads for All Versions of The T-Maxx and E-Maxx, Blue

RPM Rear Bulkheads for All Versions of The

RPM Rear Bulkheads for the T-Maxx & E-Maxx bulkheads, combined with our front bulkheads (RPM #81062 or #81065) are available to further improve the durability of these awesome monster trucks! Each RPM rear bulkhead follows the same design criteria we used to build our front bulkheads – superior materials, impact resistant design changes and lock-nuts to help prevent critical screws from stripping or backing out. All this in a part that weighs exactly the same as the stock rear bulkheads! Please see our front bulkheads (RPM #81062 & #81065) for additional details. RPM bulkheads are stock replacement parts. Each set of bulkheads is sold in pairs and molded in either black or blue and backed by our world-renowned limited lifetime breakage warranty. RPM molded products are proudly designed and manufactured right here in the USA!

  • Color: Blue
  • Brand: RPM
  • ASIN: B00C891A6Y
  • UPC: 716080180937

RPM Front Bulkheads for All Versions of The T-Maxx and E-Maxx, Black

RPM Front Bulkheads for All Versions of The

Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been missing a key link in the chain of RPM durability – the bulkheads. We've heard numerous complaints over the years requesting RPM bulkheads for these beasts and, with some creative engineering, we've found a way to solve common bulkhead breakage issues. Each RPM bulkhead starts with the RPM trademark blend of incredibly strong nylons. From there, we redesigned key areas to improve impact resistance but the most significant change comes in the form of lock nuts. After extensive testing and review of damaged stock bulkheads, we found that the most common reason stock bulkheads break is from the mounting screws stripping or backing out. Our solution was to incorporate a series of lock nuts at the chassis and skid plate mounting holes to securely lock the bulkheads in place. Once the bulkhead is secure, our materials and design changes take over for the strongest, lightest and most durable set of aftermarket bulkheads currently available! RPM front bulkheads are so light, that they weigh less than the stock parts they replace. Combined a set of RPM #81072 - black or #81075 - blue rear bulkheads with these front versions for the ultimate in strength and durability. RPM bulkheads are sold in pairs, molded in either black...

  • Color: Black
  • Brand: RPM
  • ASIN: B00C8918UM
  • UPC: 672415810620

RPM New T/E-Maxx Skidplate Set, Black

RPM New T/E-Maxx Skidplate Set,

The extended chassis rails of the newer versions of both the T-Maxx and E-Maxx would not allow our original center skid plate to bolt up to either of these trucks without modification to the chassis rails. After quite a bit of prodding from our customers, we now have a center skid plate and skid plate set designed specifically for the T-Maxx #4907and #4908 as well as E-Maxx #3905 and #3908 trucks. Unlike the stock center skid plate, our new molded center skid plate extends over the predominance of the chassis rails with better than 4mm of bulletproof RPM protection! The molded curves of our skid plate perfectly mate with the chassis support rails and act as a reduced-friction transition surface that prevents objects from hooking the stock rear skid plate. Other great features include: deep recessed screw holes help eliminate damage to the mounting screw heads, a matched grooved finish from the front of the truck to the rear and provide outstanding wear and impact resistance. The center skid plate provides a more solid tie between the two chassis side rails for added support and rigidity. Additionally, since our center skid plate runs the rearward length of the chassis side rails, less dirt and debris will be forced into the rear skid plate area of the chassis, improving driveline...

  • Color: Black
  • Brand: RPM
  • ASIN: B001LOYFHS
  • UPC: 672415807729

RPM Front Bulkheads for All Versions of The T-Maxx and E-Maxx, Blue

RPM Front Bulkheads for All Versions of The

Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been missing a key link in the chain of RPM durability – the bulkheads. We've heard numerous complaints over the years requesting RPM bulkheads for these beasts and, with some creative engineering, we've found a way to solve common bulkhead breakage issues. Each RPM bulkhead starts with the RPM trademark blend of incredibly strong nylons. From there, we redesigned key areas to improve impact resistance but the most significant change comes in the form of lock nuts. After extensive testing and review of damaged stock bulkheads, we found that the most common reason stock bulkheads break is from the mounting screws stripping or backing out. Our solution was to incorporate a series of lock nuts at the chassis and skid plate mounting holes to securely lock the bulkheads in place. Once the bulkhead is secure, our materials and design changes take over for the strongest, lightest and most durable set of aftermarket bulkheads currently available! RPM front bulkheads are so light, that they weigh less than the stock parts they replace. Combined a set of RPM #81072 - black or #81075 - blue rear bulkheads with these front versions for the ultimate in strength and durability. RPM bulkheads are sold in pairs, molded in either black...

  • Color: Blue
  • Brand: RPM
  • ASIN: B00C8919U6
  • UPC: 672415810651

RPM 80942 True Track Rear A-Arm Black T/E-Maxx

RPM 80942 True Track Rear A-Arm Black

T/E Maxx True Track Rear Arm Conversion-Black

  • Brand: RPM
  • ASIN: B0012X55QI
  • UPC: 762988643920

RPM Replacement Oversized Inner Bearing (2): Rear Carriers X-Maxx, RPM81670

RPM Replacement Oversized Inner Bearing (2): Rear Carriers

Overview This is a set of replacement bearings for RPM #81732 Oversized Axle Carriers for the Traxxas X-Maxx. These bearings are not replacement bearings for stock Traxxas Axle Carriers (#7752).Tech Notes: RPM replacement bearings are 20x32x7mm in size and only fit RPM #81732 Oversized Axle Carriers. Not compatible with stock Traxxas axle carriers.

  • Brand: RPM
  • ASIN: B01LZVNWWX
  • UPC: 672415816707

RPM 82355 Traxxas X-Maxx A-Arm, Upper and Lower, Blue

RPM 82355 Traxxas X-Maxx A-Arm, Upper and Lower,

Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-Arms that could handle the weight and the punishment these massive trucks can dish out. We reviewed numerous photos of damage to stock A-Arms to see where the weak points were, then reviewed a set of new A-Arms to see what we could do to improve both strength and durability. The result… our new X-Maxx A-Arms are designed to be the strongest, lightest arms available! starting with the upper A-arm, we used our proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it! our lower A-arm has better ground clearance than stock A-Arms and has a cross section based off of our proven 1: 5 scale HPI Baja A-Arms so you know they’re tough! We’ve also created a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won’t force you into the “walk of shame”. they’re also Universal fit, which means they’ll fit on any corner of your truck! no more worrying which arm fits where. RPM X-Maxx A-Arms are molded in our trademark blend of incredibly tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by our industry-leading limited Lifeti...

  • Color: Blue
  • Brand: RPM
  • ASIN: B071RZCGVW
  • UPC: 672415823552
Similar Rpm E-maxx Results