Bosch MG0450 4-1/2-Inch Sander Backing Pad with Lock Nut

Bosch MG0450 4-1/2-Inch Sander Backing Pad with Lock

Bosch MG0450 4-1/2-Inch Sander Backing Pad with Lock Nut.

  • Brand: Bosch
  • ASIN: B00069DVDI
  • UPC: 636123588059

Angle Grinder Ribbed Backing Pad for Resin Fiber Disc with 5/8 inch-11 Locking Nut (4.5 Inch)

Angle Grinder Ribbed Backing Pad for Resin Fiber

Fiber Disc Backing Pads are made with high quality plastic and feature spiral raised ribs for cooling while in use. Each Resin Fiber Disc backing pad also features air holes to provide additional cooling to further extend the life of each fiber disc. The rigid plastic backing pad are lighter than the rubber alternative and can be used at higher RPM. Each backing plate includes a lock nut.

  • Brand: Black Hawk
  • ASIN: B06XKL4BP2
  • UPC: 742889950822

Dewalt DW4945 4-1/2" Rubber Backing Pad (3 Pack)

Dewalt DW4945 4-1/2" Rubber Backing Pad (3

Dewalt DW4945 4-1/2" Rubber Backing Pad (3 Pack)

  • Brand: DEWALT
  • ASIN: B002YCL3NU
  • UPC: 028874049451

DEWALT DW4945 4-1/2-Inch Rubber Backing Pad with Locking Nut

DEWALT DW4945 4-1/2-Inch Rubber Backing Pad with Locking

  • Brand: DEWALT
  • ASIN: B00004RHAT
  • UPC: 028874049451

Superior Pads and Abrasives BP70 7" Angle Grinder Backing Pad for Resin Fiber Disc with 5/8"-11 Locking Nut

Superior Pads and Abrasives BP70 7" Angle Grinder

Superior Pads and Abrasives BP70 7 inch Angle Grinder Backing Pad for Resin Fiber Disc. Each pad is supplied with a 5/8 inch-11 metal locking nut. Note: Disc is flat and firm except for where the nut screws down.

  • Brand: Superior Pads and Abrasives
  • ASIN: B00LM9LM64
  • UPC: 099461749252

Makita 192978-2 7" Rubber Backing Pad

Makita 192978-2 7" Rubber Backing

Makita 7" Rubber backing pads are ideal for sanding and polishing applications. Their flexibility makes them ideal for contoured work surfaces. For use with Makita 7" Or 9" Angle grinders, angle sanders, disc sanders or Polisher/sanders.

  • Color: Black
  • Brand: Makita
  • ASIN: B000MRS42M
  • UPC: 094703166071

BOSCH 5" Rubber Backing Pad w/Lock Nut Part No. MG0500

BOSCH 5" Rubber Backing Pad w/Lock Nut Part

Bosch provides a full line of angle grinder accessories designed for industrial applications. The Bosch MG0500 5-Inch Rubber Backing Pad with Lock Nut has an overall diameter of 5-Inches, 5/8-Inch to 11-Inch Arbor, and a max RPM of 11,500.

  • Brand: Bosch
  • ASIN: B0009H5M5C
  • UPC: 000346277456

Makita 743009-6 4-Inch Rubber Pad

Makita 743009-6 4-Inch Rubber

Made of durable rubber and used as a back support for resin fiber discs on Grinders; held in place by a lock nut. Can be cleaned with soap and water or a mild solvent.

  • Brand: Makita
  • ASIN: B00018ABSC
  • UPC: 785533113525

4-1/2" x 5/8"-11 Resin Fiber Disc Backing Pad with Lock Nut for Angle Grinder

4-1/2" x 5/8"-11 Resin Fiber Disc Backing Pad

Designed for use with resin fiber sanding discs. Ribbed surface allows better air flow to extend disc life. Durable polypropylene pad, cast alloy plate 5/8 in-11 threaded adapter plate Raised rib surface 20000 RPM max. 4 1/2" Diameter

  • Brand: aj, cal, stk
  • ASIN: B075LV4THW
  • UPC: 689722186492

DEWALT DW4940 4-1/2-Inch Rubber Backing Pad with 10-Inch by 1.25 Locking Nut

DEWALT DW4940 4-1/2-Inch Rubber Backing Pad with 10-Inch

For use with handheld grinders. Steel reinforced with locking nut. 12,000 max rpm.

  • Brand: DEWALT
  • ASIN: B00004RHAR
  • UPC: 696731438221

MK Diamond 155795 11 Nut Hard Rubber Backplate Disc with 5/8", 4"

MK Diamond 155795 11 Nut Hard Rubber Backplate

MK Diamond 155795 4 inch Hard Rubber Back plate Disc with 5/8 inch - 11 Nut features hook and loop backed rubber disc for attaching polishing pads to hand-held polishing tools.

  • Brand: MK Diamond
  • ASIN: B000KA3GD8
  • UPC: 092333753449

TUFF BUFF - Wet/Dry Diamond Polishing Pads - 11 Piece Set with Rubber Backer for Granite, Stone, Concrete, Marble, Travertine, Terrazzo- 4" Inch Pads

TUFF BUFF - Wet/Dry Diamond Polishing Pads -

Try TUFF BUFF Diamond Polishing Pads for your next polishing project. You won't be disappointed! Whether it's concrete, granite, stone, travertine or terrazzo, TUFF BUFF has got you covered. We provide High Quality products that will give you a professional finish, as well as competitive pricing. You just can't go wrong with TUFF BUFF. 12 PIECE PACKAGE INCLUDES: -2 Sets of Grit 50,150,300,500 Pads-1 Set of Grit 1000,2000,3000 Pads-1 Rubber backer (backer has water feed hole for wet polishing) FEATURES: -THE HIGHEST QUALITY - Made with quality diamond powder impregnated in resin, TUFF BUFF is one of the toughest and most durable polishing pads on the market -4-INCH PADS ARE lDEAL for wet application to buff out scratches and attain a mirrored effect on granite, stone, and marble surfaces -VELCRO BACKED pads provide easy connect and removal and are color coded to easily identify polishing pads' grit HOW TO USE: Install the rubber backer onto the grinder. Attach the polishing pad velcro loop side to the backer velcro loop side, so they form a tight bond. Make sure that the pad is CENTERED on the backer pad. If it is not centered it will shorten the lifespan of the polishing pads. Then you're ready to get started! When wet polishing, use a continuous flow of water at low RPM f...

  • Brand: Tuff Buff
  • ASIN: B073ZP3X6T
  • UPC: 647732057249

Walter Surface Technologies 15D044 Backing Pad Assemblies- 4 ½ in .Sanding Disc Pad. Abrasive Wheel Pads

Walter Surface Technologies 15D044 Backing Pad Assemblies- 4

Walter Surface Technologies Backing Pad Assembly consists of a backer pad for sanding discs and a clamping nut. Designed to work with 4 ½ in. Coolcut (aluminum oxide) and Topcut (zirconia alumnia) sanding discs by Walter Surface Technologies, the Backing pad is graded for maximum rotational speed of 13,300 RPM. Sanding Backing pad is manufactured using industrial quality, impact-resistant plastic that ensures flexibility. This flexible sanding disc pad can be used for weld blending or removal purposes and during finishing curved surface. The clamping nut is available to ensure firm placement on sanding disc.

  • Brand: Walter Surface Technologies
  • ASIN: B003O9ZT5A
  • UPC: 662980145449

SKIL 4-1/2" Sander/Grinder Rubber Backing Pad w/Lock Nut Model # 99420

SKIL 4-1/2" Sander/Grinder Rubber Backing Pad w/Lock Nut

Founded in 1924 as the Michel Electric Handsaw Company and renamed Skilsaw, Inc. in 1926, SKIL has become one of the most recognized and powerful brands in the power tool industry. From circular saws and jigsaws to sanders and drills, SKIL power tools are engineered to deliver the high-performance and durability that today's growing population of Do-It-Yourselfers demand. Every product of the growing line of SKIL tools is the result of extensive end-user research, consumer input, computer assisted design and rigorous testing, both in our laboratories and in the field. SKIL Power Tools are products of the Robert Bosch Tool Corporation.

  • Brand: Skil
  • ASIN: B000BMBPHY
  • UPC: 039725994202

HYCC 2-inch & 3-inch Disc Pad Holder with 1/4" Shank for Roloc Round Rotary Tool Sanding Polishing Surface Conditioning Discs - Compatible with 3M ROLOC Scotch-Brite Brand Discs - 4 PACK

HYCC 2-inch & 3-inch Disc Pad Holder with

Disc Pad Adaptor Pad Holder- Provide firm support when using roloc and other bristle discs.Play a fixed role, with pressure, shock absorption, noise reduction and other functions. For 3M and other Similar roloc Sanding & Polishing Discs. This disc pad from HYCC works with any Roloc-type discs and pads utilizing the type R mount. Our disc pad holders are designed to provide maximum performance and durability while being budget minded. Rejoice at the way it fits and works perfectly with your power drill.Features a Heavy-Duty rubber pad and aluminum core with 1/4"(6.35mm) plated removable steel shank that chucks securely into any rotary tools.Various different treated pad backs available that screw tightly onto the mandrel of your power tool or drill. Feature: Allow attachment of various types of discs, complete everything from prep to polish. Disc Pad Adaptor Pad Holder- Provide firm support when using roloc and other bristle discs. Quick change system saves time and speeds up your work. Thread & Shaft Compatible - Suitable on equipment using both a threat type drive or for the round tube shaft tool. Twist Lock Mounting - The sanding discs/grids will spin on and lock-in securely while twisting off easily when changing them out. No Extra Vibration - The Well Build Tool assures that ...

  • Color: Black
  • Brand: HYCC
  • ASIN: B01MT3FYUV
  • UPC: 753070489496
Similar Rubber Backing Pad Disc Nut Results