Seachem Reef Buffer 1 Kilo

Seachem Reef Buffer 1

Reef Builder™ and Reef Buffer™ may be used together. Use Reef Builder™ to raise carbonate alkalinity without affecting pH. Use Reef Buffer™ to raise carbonate alkalinity and pH. Unlike the competition, Reef Builder™ contains calcium, magnesium, and strontium to compensate for the inevitable loss which occurs when raising alkalinity. It also contains sufficient magnesium to restore magnesium routinely depleted.

  • Brand: Seachem
  • ASIN: B0002DGMFM
  • UPC: 000116067706

Seachem Reef Buffer 250gram

Seachem Reef Buffer

Reef Buffer will also raise carbonate alkalinity; however, it is intended primarily for use as a buffer in a reef system where the maintenance of a pH of 8.3 is often difficult. When pH is not an issue, Reef Builder or Reef Carbonate should be your first choice for a carbonate alkalinity supplement. Reef Buffer is specifically designed to meet the needs and requirements of the closed reef environment. The principal difference between Reef Buffer and Marine Buffer is that the pK of Reef Buffer is slightly higher than that of Marine Buffer. The pK of a buffering agent is equivalent to the pH around which that buffer most strongly buffers. One would presume, then, that the pK of a saltwater buffer should be 8.3; however, the multitude of organic acids produced by the inhabitants of a reef system forces pH downward to a much greater degree than in a non-reef, marine system. A buffer with a pK of 8.3 would end up yielding a pH more in the range of 8.0-8.2. Reef Buffer's higher pK (8.6) allows for greater pH stability in a reef system where the bio load is significantly more than in a fish only system.

  • Brand: Seachem
  • ASIN: B0002DGMF2
  • UPC: 000116067607

Seachem Reef Buffer, 500 grams

Seachem Reef Buffer, 500

Reef Buffer is specifically designed to meet the needs and requirements of the closed reef environment. The principal difference between Reef Buffer and Marine Buffer is that the pK of Reef Buffer is slightly higher than that of Marine Buffer. The pK of a buffering agent is equivalent to the pH around which that buffer most strongly buffers. One would presume, then, that the pK of a saltwater buffer should be 8.3; however, the multitude of organic acids produced by the inhabitants of a reef system forces pH downward to a much greater degree than in a non-reef, marine system. A buffer with a pK of 8.3 would end up yielding a pH more in the range of 8.0-8.2. Reef Buffer's higher pK (8.6) allows for greater pH stability in a reef system where the bioload is significantly more than in a fish only system.

  • Brand: Seachem
  • ASIN: B0002DGM8E
  • UPC: 000116067300

Reef Buffer, 4 kg / 8.8 lbs

Reef Buffer, 4 kg / 8.8

Reef buffer is intended primarily for use in a reef system where the maintenance of a pH of 8.3 is often difficult. When used as directed reef buffer will raise the pH of your reef system to 8.3 without fear of accidentally overshooting the pH to a dangerous level. Reef buffer will also raise carbonate alkalinity. Reef buffer is a blended product and is not just sodium carbonate. Reef Builder should be used to raise alkalinity when pH is not a problem. Use Sachem's Multitest: marine pH & alkalinity to check pH and total alkalinity.

  • Brand: Seachem
  • ASIN: B0002DGMG6
  • UPC: 000116067904

Reef Builder, 1.2 kg / 2.6 lbs

Reef Builder, 1.2 kg / 2.6

Reef Builder, 1.2 kg / 2.6 lbs

  • Brand: Seachem
  • ASIN: B00025K0Q2
  • UPC: 000116036702

Seachem Reef Carbonate 500ml

Seachem Reef Carbonate

Seachem Reef Carbonate 500ml

  • Brand: Seachem
  • ASIN: B0002DGM5C
  • UPC: 000116066303

Seachem AquaVitro Eight.Four 11.8oz

Seachem AquaVitro Eight.Four

Maintains pH of 8.3 - 8.5, Raises marine pH while adjusting alkalinity, Concentrated

  • Brand: Seachem
  • ASIN: B0018CG6KW
  • UPC: 015568977558

Seachem Reef Builder 300gram

Seachem Reef Builder

Reef builder raises carbonate alkalinity without immediately impacting on pH. With long term use there will be a tendency to stabilize at pH 8.3. Carbonates and calcium are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. Used as directed, reef builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity. Reef builder and reef buffer may be used together. Use reef builder to raise carbonate alkalinity without affecting pH. Use reef buffer to raise carbonate alkalinity and pH.

  • Brand: Seachem
  • ASIN: B00025K0PS
  • UPC: 000116036603

Reef Builder, 4 kg / 8.8 lbs

Reef Builder, 4 kg / 8.8

Reef Builder raises carbonate alkalinity without immediately impacting on ph. With long term use there will be a tendency to stabilize at pH 8.3. Carbonates and calcium are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. To prevent this you must provide carbonates (Reef Builder) and calcium (Reef Advantage Calcium or Reef Complete). Used as directed, Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity. Reef Builder and Reef Buffer may be used together. Use Reef Builder to raise carbonate alkalinity without affecting ph. Use Reef Buffer to raise carbonate alkalinity and ph. Reef alkalinity should be maintained at 3-5 me/L (8-14 dahl). Alkalinity should not be allowed to fall below 2 me/L. DO NOT OVERDOSE: Excess alkalinity may enhance the loss of calcium, magnesium, and strontium. Do not directly mix with any calcium, magnesium, or strontium supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart. Contains carbonate, bicarbonate, chloride, and sulfate salts of sodium, magnesium, calcium, strontium, and potassium. Each gram contains a minimum of 12 me of alkalinity.

  • Brand: Seachem
  • ASIN: B00029PO7S
  • UPC: 000116036900

Reef Builder, 600 g / 1.3 lbs

Reef Builder, 600 g / 1.3

Reef Builder raises carbonate alkalinity without immediately impacting on ph. With long term use there will be a tendency to stabilize at pH 8.3. Carbonates and calcium are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. Used as directed, Reef Builder will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity. Reef Builder and Reef Buffer may be used together. Use Reef Builder to raise carbonate alkalinity without affecting ph. Use Reef Buffer to raise carbonate alkalinity and ph.

  • Brand: Seachem
  • ASIN: B00025K1ES
  • UPC: 000116036306

Seachem Marine Buffer 1 Kilo

Seachem Marine Buffer 1

Marine Buffer will Safely raise marine pH to 8.3. It will not raise pH above 8.3 even if inadvertently overdosed. Marine Buffer is a blended product and is not just sodium bicarbonate or sodium carbonate, commonly sold as a substitute. Such products can raise pH to dangerous levels if not used properly. Marine Buffer contains sodium, magnesium, calcium, strontium, and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate.

  • Brand: Seachem
  • ASIN: B000255PDA
  • UPC: 000116034708

Reef Fusion, 1, 4 L / 1.1 fl. gal.

Reef Fusion, 1, 4 L / 1.1 fl.

Reef Fusion 1 and reef Fusion 2 are the foundation of a system formulated to provide the essentials for the reef aquarium. Reef Fusion 1 provides calcium, while reef Fusion 2 provides alkalinity. When used together, the reef Fusion system will maintain calcium and alkalinity levels. Reef Fusion 1 provides not only 100, 000 mg/L of ionic calcium, but also includes Biologically Appropriate levels of magnesium, strontium, boron, iron, manganese, and molybdenum. Reef Fusion 2 contains a mixture of carbonates and bicarbonates at an alkalinity of 4400 meq/L. It is designed to restore and maintain alkalinity in the reef aquarium and provide calcareous species with the essential carbonate needed for growth. When used as directed, reef Fusion 1 and reef Fusion 2 will maintain the critical levels of calcium and alkalinity necessary for healthy coral growth, while providing Biologically Appropriate levels of other elements and trace minerals.

  • Brand: Seachem
  • ASIN: B003I5QSXW
  • UPC: 000116120906

Seachem Reef Complete 500ml

Seachem Reef Complete

Reef complete is a concentrated optimized blend of ionic calcium designed to restore and maintain calcium to levels found in natural seawater without affecting pH. Calcium and carbonates are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. To prevent this you must provide calcium (reef complete) and carbonates (reef builder or reef carbonate). reef complete also includes magnesium and strontium in amounts proportionate to typical utilization ratios. This allows one to maintain These two important elements while maintaining calcium.

  • Color: standart
  • Brand: Seachem
  • ASIN: B000256976
  • UPC: 015568976964

Seachem Marine Buffer 250grams

Seachem Marine Buffer

Marine Buffer will Safely raise marine pH to 8.3. It will not raise pH above 8.3 even if inadvertently overdosed. Marine Buffer is a blended product and is not just sodium bicarbonate or sodium carbonate, commonly sold as a substitute. Such products can raise pH to dangerous levels if not used properly. Marine Buffer contains sodium, magnesium, calcium, strontium, and potassium salts of carbonate, bicarbonate, chloride, sulfate, and borate.

  • Brand: Seachem
  • ASIN: B001F0GWQK
  • UPC: 780231507843

Seachem Acid Buffer 600gram

Seachem Acid Buffer

Acid Buffer™ is a non–phosphate buffer to lower pH and buffer with Alkaline Buffer™. Both buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Acid Buffer™ lowers pH and buffers between 6.0 and 8.0 when used with Alkaline Buffer™. As Acid Buffer™ lowers pH it converts carbonate alkalinity (KH) into available CO2.

  • Brand: Seachem
  • ASIN: B0006JLX88
  • UPC: 000116024303
Similar Seachem Reef Buffer Results