Maxim Integrated DG508ACJ+ Analog Multiplexer-demultiplexer DG508 Series 18 V 450 Ohm 1 Channel (1 x 8:1) Surface Mount Mux/Demux - PDIP-16-1 Item(s)

Maxim Integrated DG508ACJ+ Analog Multiplexer-demultiplexer DG508 Series 18

DG508 Series 18 V 450 Ohm 1 Channel (1 x 8:1) Through Hole Mux/Demux - PDIP-16 ***** For more information refer to the specification sheet located in the 'Downloads' section below the image *****

  • Brand: Maxim Integrated
  • ASIN: B0748LW7LJ

On the Physical Security of Physically Unclonable Functions (T-Labs Series in Telecommunication Services)

On the Physical Security of Physically Unclonable Functions

This book investigates the susceptibility of intrinsic physically unclonable function (PUF) implementations on reconfigurable hardware to optical semi-invasive attacks from the chip backside. It explores different classes of optical attacks, particularly photonic emission analysis, laser fault injection, and optical contactless probing. By applying these techniques, the book demonstrates that the secrets generated by a PUF can be predicted, manipulated or directly probed without affecting the behavior of the PUF. It subsequently discusses the cost and feasibility of launching such attacks against the very latest hardware technologies in a real scenario. The author discusses why PUFs are not tamper-evident in their current configuration, and therefore, PUFs alone cannot raise the security level of key storage. The author then reviews the potential and already implemented countermeasures, which can remedy PUFs’ security-related shortcomings and make them resistant to optical side-channel and optical fault attacks. Lastly, by making selected modifications to the functionality of an existing PUF architecture, the book presents a prototype tamper-evident sensor for detecting optical contactless probing attempts.

  • ASIN: 3319758195

Current Sense Amplifiers for Embedded SRAM in High-Performance System-on-a-Chip Designs (Springer Series in Advanced Microelectronics Book 12)

Current Sense Amplifiers for Embedded SRAM in High-Performance

System-on-a-chip (SoC) designs result in a wide range of high-complexity, high-value semiconductor products. As the technology scales towards smaller feature sizes and chips grow larger, a speed limitation arises due to an in­ creased RC delay associated with interconnection wires. Innovative circuit techniques are required to achieve the speed needed for high-performance signal processing. Current sensing is considered as a promising circuit class since it is inherently faster than conventional voltage sense amplifiers. How­ ever, especially in SRAM, current sensing has rarely been used so far. Practi­ cal implementations are challenging because they require sophisticated analog circuit techniques in a digital environment. The objective of this book is to provide a systematic and comprehen­ sive insight into current sensing techniques. Both theoretical and practical aspects are covered. Design guidelines are derived by systematic analysis of different circuit principles. Innovative concepts like compensation of the bit­ line multiplexer and auto-power-down will be explained based on theory and experimental results. The material will be interesting for design engineers in industry as well as researchers who want to learn about and apply current sensing techniques. The focus ...

  • ASIN: B000VSF2G8

E-link 2 Channel Video multiplexer Over one coaxial Cable for Normal Standard Analog Cameras only, Not Support AHD/CVI/TVI 720P/1080P Camera

E-link 2 Channel Video multiplexer Over one coaxial

E-link LNK-MV201 series video multiplexer bound the 2-ch video signal of the standard cameras and theTransmitter and a Receiver. From the receiver to the transmitter, it transmits 2 channel video signals through one coaxial cable to long distance. Besides, as you don't need to install extra cable for data signals, you can save your money and time. Features 2Channel video signal for standard analog camera over 1 coaxial cable Designed according to projects with minimum installation volume requirement Long distance transmission up to 500m Frequency Division Multiplexing, with all video and data transmission real-time and all images high-definition and non-delay. Non-debug, adaptive: as long as the transmission distance range, the device willautomatically adjust their targets, One coaxial cable, no extra cable, which save infrastructure cost,(cost saving 25~30%) Maintaining high quality video & anti-interference immunity Easy installation with BNC harnessPower Supply:DC12V/1ADimension:158*124*39mm It does not come with power because the camera usually provides a centralized power supply. Video Coax Multiplexors direct connection to a centralized power supply not only reduces cable clutter and reduces costs,

  • Color: Black 2 CH
  • Brand: E-link
  • ASIN: B071YLCLD3

ON SEMICONDUCTOR MC74HC4052ADR2G 74HC Series 2 to 6 V Analog Multiplexers / Demultiplexers - SOIC-16 - 100 item(s)

ON SEMICONDUCTOR MC74HC4052ADR2G 74HC Series 2 to 6

74HC Series 2 to 6 V Analog Multiplexers / Demultiplexers - SOIC-16 ***** For more information refer to the specification sheet located in the 'Downloads' section below the image *****

  • Brand: ON Semiconductor
  • ASIN: B07CBMKT4N

Circuit Synthesis with VHDL (The Springer International Series in Engineering and Computer Science)

Circuit Synthesis with VHDL (The Springer International Series

One of the main applications of VHDL is the synthesis of electronic circuits. Circuit Synthesis with VHDL is an introduction to the use of VHDL logic (RTL) synthesis tools in circuit design. The modeling styles proposed are independent of specific market tools and focus on constructs widely recognized as synthesizable by synthesis tools. A statement of the prerequisites for synthesis is followed by a short introduction to the VHDL concepts used in synthesis. Circuit Synthesis with VHDL presents two possible approaches to synthesis: the first starts with VHDL features and derives hardware counterparts; the second starts from a given hardware component and derives several description styles. The book also describes how to introduce the synthesis design cycle into existing design methodologies and the standard synthesis environment. Circuit Synthesis with VHDL concludes with a case study providing a realistic example of the design flow from behavioral description down to the synthesized level. Circuit Synthesis with VHDL is essential reading for all students, researchers, design engineers and managers working with VHDL in a synthesis environment.

  • ASIN: 1461361915

Wavelet, Subband and Block Transforms in Communications and Multimedia (The Springer International Series in Engineering and Computer Science Book 504)

Wavelet, Subband and Block Transforms in Communications and

Wavelet and subband transforms have been of great interest in the fields of - gineering and applied mathematics. The theories of these powerful signal p- cessing tools have matured and many applications utilizing them are emerging in different disciplines. This book, comprised of eleven chapter contributions from prominent researchers in the field, focuses on communications and mul- media applications of wavelet and subband transforms. The first six chapters of this book deal with a variety of communications applications that significantly benefit from wavelet and subband theories. S- ilarly, the remaining five chapters present recent advances in multimedia - plications of wavelet and subband transforms. These chapters interconnect the requirements of applications with the underlying theory and their engineering solutions. Hence, the reader can easily trace the entire path from fundamentals to the purpose and merit of application in hand. A combined list of references for the entire volume is given at the end of the text that should be helpful to the interested reader for a further study. This book is anticipated to be of particular interest to engineers and sci- tists who want to learn about state-of-the-art subband and wavelet transform applications as well as their theoretical...

  • ASIN: B000WDRVSE

34922T/001 - Test Accessory, Terminal Block, 34922A 70-Channel Armature Multiplexers, 34980A Series (34922T/001)

34922T/001 - Test Accessory, Terminal Block, 34922A 70-Channel

Description:The 34922T/001 is a Terminal Block with solder-type connectors. The terminal block is suitable for use with the 34922A 70-channel armature multiplexers. This terminal block is used for discrete wiring. It supports up to 20AWG wire size typical for100 connections. This terminal block is labelled with the model number and the abbreviated module name. In addition, space is available on the label to write the slot number.Applications : IndustrialSpecification:Accessory Type : Terminal BlockFor Use With : 34922A 70-Channel Armature MultiplexersProduct Range : 34980A SeriesRoHS Compliant: Not applicableRoHS Phthalates Compliant: To be advisedSVHC: To Be Advised

  • ASIN: B07QYDRJDW

CTCUnion FRM220-FXS-4 - Four POTS RJ11 FXS telephone lines over fiber multiplexer, SFP slot, standalone w/AC adapter

CTCUnion FRM220-FXS-4 - Four POTS RJ11 FXS telephone

FRM220-FXS-4 is a 4 channel POTS (Plain Old Telephone System) over fiber converter/extender. The four POTS interface uses a standard RJ-11C modular connector for each copper pair line. A pair of FRM220-FXS-4 and FRM220-FXO-4 is required to implement an end to end system. FXO mode connects to a telephone line (PSTN) or PBX station line and has ability to detect ringing voltages and to act as a telephone. FXS mode is the reciprocal unit and has ability to act as PSTN and connects to a telephone device. The small multiplexer offers great flexibility on the fiber port by adopting the widely used industry standard SFP Fast Ethernet 155M rated transceiveron both the FRM220-FXO-4 and FRM220-FXS-4 models. When the FRM220-FXS-4 card is placed in the FRM220 chassis with SNMP management, in-band management allows configuring and viewing the card and remote converter's status, type, version, fiber link status, on hook status and alarms. When placed in a single slot chassis and used standalone without management, the card may be configured by DIP switch. Technical specifications POTS Line: FXS (Impedance:600ohms, REN:0.4) Interfaces: RJ11 port 600Ohms and SFP slot fiber port Operating wavelength: depending on the SFP transceiver used Operating distance: Up to 120Km on 9/125um single-mode (SM)...

  • Brand: CTCUnion
  • ASIN: B076MDVGHH
  • UPC: 811704014916

Major Brands 74LS154 ICS and Semiconductors, 4 to 16 Line Decoder/Demultiplexer

Major Brands 74LS154 ICS and Semiconductors, 4 to

The product type is Major Brands 74LS154 ICs and Semiconductors, 4 to 16 Line Decoder/Demultiplexer. Made in Taiwan and manufactured by Major Brands.

  • Brand: Xytronic
  • ASIN: B00B88F0RG
Similar Series Multiplexer Results