Makita 5 Pack - 4.5" Grinding Wheel For 4.5" Grinders - Ultra-Duty Grinding For Cast Iron, Stainless Steel & Metal - 4-1/2 x 1/4 x 7/8-Inch

Makita 5 Pack - 4.5" Grinding Wheel For

Optimize your metal grinding work with these 10 Makita Premium 4-1/2" Grinding Wheels for Cast Iron, Stainless Steel & Metal, at a 15-30-degree angle, to the work surface, applying the proper amount of pressure to allow the grinding wheel to do the work. For best results, consider not pushing too hard on the wheel, which can cause the grinder to stall or kick back or give a less efficient grinding action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage. Applying light to moderate pressure and consistent movement will provide the most efficient grind and minimize heat build-up. Consider using light pressure and a consistent motion throughout the grind for the fastest grind-rate and prolonged wheel life. Excessive pressure through the grind causes increased friction and heat build-up, which can cause increased heat discoloration of the work piece and reduced wheel life.For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient grinds.

  • Brand: Makita
  • ASIN: B074SPQ794
  • UPC: 088381399791

25 Pack Black Hawk 4-1/2" x .045 x 7/8" Arbor Depressed Center Cut Off Wheels - Metal & Stainless Steel Type 27

25 Pack Black Hawk 4-1/2" x .045 x

4.5" x .045" x 7/8" Depressed Center Cut-Off Wheels by Black Hawk Abrasives are Black Hawk's most popular 4-1/2 inch cutoff disc but now in recessed center form for flush cutting. The 4-1/2" x 3/64" x 7/8" Type 27 cutoff wheel features premium heat-treated aluminum oxide grains, a double dose of high tensile strength fiberglass mesh reinforcement, and a T27 sunken center.

  • Brand: Black Hawk
  • ASIN: B06XKNGJV4
  • UPC: 742889950792

45PC Wire Brushes for Drill Set Stainless Steel Wheel Brushes Dremel Accessories for Rotary Tools - Grinding, Sanding, Polishing

45PC Wire Brushes for Drill Set Stainless Steel

Instruction: For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collect or chuck to hold onto the bit. Keep a light touch, letting the tips of the brush do the work. Too much pressure can break the bristles. Before using on a material, allow the tool with brush to run at operating speed for at least one minute to discharge any loose bristles. Make sure no one stands in front of or in line with the brush. The bristle brush can be used with polishing compound. Do not run in excess of 15,000 rpm. Therefore, do not use with a Single-Speed MultiPro Rotary Tool or a Heavy-Duty Flex-Shaft Tool unless you use a Speed Control. Always read and follow all safety instructions of your rotary tool and always wear eye protection. Specifications: Material: steel Color: silver Application: suitable for metal surface polishing, rust etc. Shank Diameter: Approx 1/8" or 3mm Shank Length: Approx 2 inch/ 50mm Wire brush Diameter: Approx 3/16", 9/16" and 1" (5mm / 15mm/ 25mm) Package include: 15 x 25mm wire wheel brush 15 x 15mm wire wheel brush 15 x 5mm wire wheel brush

  • Brand: D&L
  • ASIN: B07KRHR7HS
  • UPC: 723585843601

50 Pack - 4.5"x.040"x7/8" Quality Thin Cut Off Wheels Metal & Stainless Steel

50 Pack - 4.5"x.040"x7/8" Quality Thin Cut Off

Don't be fooled by poorly constructed, cheap imitations claiming to offer you the same level of quality. These cut off wheels have been engineered to stand up to stringent European standards. In tests the product has performed as well as or surpassed many of the most recognizable brand names in the construction business, worldwide. Why pay more for the same quality? Our high performance, high quality cut off wheels offer a long service life, require less force to complete each cut, vibration free cut and maximized cutting capacity at a fraction of the cost.

  • Brand: Benchmark Abrasives
  • ASIN: B015VOMD5E

25 Pack 4-1/2" x 1/16" x 7/8" Metal and Stainless Steel Cut Off Wheels - For Angle Grinders

25 Pack 4-1/2" x 1/16" x 7/8" Metal

4-1/2" x 1/16" x 7/8" Cut Off Wheel by Black Hawk Abrasives is designed to cut and cut and cut without quitting. This disc features a 1/16" thick cutting edge for longer life and increased lateral strength compared to thinner cut off wheel alternatives thus making it ideal for aggressive cutting applications. Additionally, these 4.5 inch cutting discs are fiberglass mesh reinforced for further safety. These 4-1/2" cutting wheels are made to be attached to an angle grinder and can be used to cut steel, stainless steel, fiberglass, plastic irons and all other ferrous metals. These discs are extremely versatile and can be used from applications ranging from general metal cutting to slicing rebar to cutting angle iron.

  • Brand: Black Hawk
  • ASIN: B077Y6G6NW
  • UPC: 742889951133

Dewalt DW8061B5 4 x 0.045 Inch Metal and Stainless Steel Cutting Wheels , 4 Inch by 0.045-Inch

Dewalt DW8061B5 4 x 0.045 Inch Metal and

Includes: 4 in. x 0.045 in. Metal and Stainless Steel Cutting Wheel (5-Pack) - DW8061B5.

  • Brand: DEWALT
  • ASIN: B005B8LZ14
  • UPC: 885911206051

Buffing Polishing Wheel For Drill - 8Pcs White Flannelette Polishing Mop Wheel Cone/Column/Mushroom/T-shaped Wheel Grinding Head With 1/4 Handle For Manifold / aluminum / stainless steel / chrome etc.

Buffing Polishing Wheel For Drill - 8Pcs White

Product Details: * 100% brand new, made with high quality. * Material:cotton * Shanks are 1/4 inch round and continue with hex shape so it does not slip on your drill. * For final polishing of interior, flat and irregular surfaces. * Specially designed for polishing recessed area such as mag wheels, motorcycle wheels manifolds. * Fabric layers edge with raising treatment, suitable for metal, jewelry, metal, stainless steel, aluminum products, wood, plastics, ceramics, glass and watches industry of surface grinding and polishing. *Polishes any type of aluminum NOTES: 1. All polishing wheels should be cleaned before use, smooth, to ensure that no residual in the particles.  2. After use, they should immediately be cleaned, dried in the shade.  Package Includes: 8Pcs Buffing Wheel

  • Color: white
  • Brand: TONGTU
  • ASIN: B07FFWDYW6

DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless Cutting Wheel, 7/8-Inch Arbor, 5-Pack

DEWALT DW8062B5 4-1/2-Inch by 0.045-Inch Metal and Stainless

5 pack, 4.5" x 0.045", metal & stainless cutting wheel, 7/8" arbor, thin .045" wheel design for fast burr free cutting, proprietary aluminum oxide grain combination for aggressive cutting action, proprietary material mix ensures durable long life wheels, 2 full sheets of fiberglass for durability & safety, fast burr free cutting.

  • Brand: DEWALT
  • ASIN: B005B8LZCI
  • UPC: 028877525877

5 Pack 4-1/2" x 1/4" x 7/8" Depressed Center Metal Grinding Wheels - For 4.5" Inch Angle Grinders

5 Pack 4-1/2" x 1/4" x 7/8" Depressed

4.5" Grinding Wheel by Black Hawk Abrasives is a staple in every metal shop. Designed to be attached to a 4-12" angle grinding that accepts 7/8" arbor holes, these discs can rip through metal and last well beyond the industry average. Each 4.5 inch grinding disc is made with A24T aluminum oxide grains which are extra coarse for high stock removal. The discs also come fitted with fiberglass mesh reinforcement for added safety.

  • Brand: Black Hawk
  • ASIN: B0791MGN72
  • UPC: 742889951157

IVY Classic 38910 3-Inch x 5/8-Inch-11 Arbor, Stainless Steel Crimped Wire Cup Brush - 0.012-Inch Coarse, 1/Card

IVY Classic 38910 3-Inch x 5/8-Inch-11 Arbor, Stainless

IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. IVY Classic Stainless Steel Crimped Wire Brushes are designed for removing rust, dirt, scale, paint or welds from flat surfaces. The brushes are constructed out of corrosion resistant stainless steel that does not leave deposits that cause rust and are precision balanced to eliminate vibration. The threaded arbor on these brushes is intended for use on angle grinders.

  • Brand: IVY Classic
  • ASIN: B011ICBLVK
  • UPC: 738226389103

Cut-off Wheel, B, 50-Pack Cutting Wheels Double Reinforced Fiber Flat Grinding Wheel Aggressive Cutting Blades for Metal and Stainless Steel, T41-A/F46Q4BF 4.5" x .045" x 7/8-Inch for Grinders, MPA

Cut-off Wheel, B, 50-Pack Cutting Wheels Double Reinforced

Give the high speed and sharp electric grinders power cut off tool to you and look for quality designs to your cordless grinder cut off wheel. All these are for we know what troubles you. Are you afraid that your porter cable angle grinder wheels will break easily? Worried about cutting quality using normal electric cut off wheel tool? Troubled by grinder cutting blades broken frequently? Wanna have durable and reliable grinder disc wheels? Worry about the color deviation of stainless steel material after cutting? Now, you can get rid of all these worries with our supreme cut off wheel!T41-A/F46Q4BF 4.5" x .045" x 7/8-Inch, 25-Pack, Max RPM: 13300, MPA Professional Quality Our company is a manufacturer which is specialized in the production of cutting discs. We concentrate on creating professional cutting disk quality. Fast and Aggressive Cuts After a series of technical improvements, and thousands of cutting test of our united abrasives cut off wheel, the sharpness of our grinder wheels 4 1/2 inches for angle grinder is enhanced. Good fit on spindle, and grind very well, and also removes material quickly. Fit grinder and work great for cutting bolts and metal. The side grinder cut off blades bring a faster and sharper cutting experience to you. Extensive Use Our cutting dis...

  • Color: 50 Pack
  • Brand: B
  • ASIN: B076PY8PN6
  • UPC: 614405059053

25 Pack 3" x 1/32" x 3/8" Arbor Metal & Stainless Steel Cut Off Wheels - For Die Grinders

25 Pack 3" x 1/32" x 3/8" Arbor

3" x .03" x 3/8" Cut-Off Wheels by Black Hawk Abrasives 3" x 1/32" x 3/8" Cut Off Wheels by Black Hawk Abrasives are fast cutting, small diameter, ultra-thin abrasive metal cutting wheels. Each 3-inch cutting disc is manufactured with heat-treated aluminum oxide grains, bonded and reinforced with high tensile strength fiberglass webbing. The construction of this 3 inch cutoff disc ensures that despite its thin width it will last long, be safe, and have increased lateral stability.

  • Brand: Black Hawk
  • ASIN: B06XKHV1TX
  • UPC: 742889950785

KSEIBI 50 Pack 646004 Angle Grinder Cut Off Wheels for Cutting Metal Stainless Steel 4-1/2"x0.040"x7/8" Type 41 Ultra Thin Disc

KSEIBI 50 Pack 646004 Angle Grinder Cut Off

From Factory: KSEIBI cutting wheel is a little hard, with durability and rapidity.

  • Color: Red
  • Brand: KSEIBI
  • ASIN: B072N4NSPT

DEWALT DW8851B5 4-1/2-Inch by 0.45-Inch XP Metal Cutting Wheel, 7/8-Inch Arbor (5-Pack)

DEWALT DW8851B5 4-1/2-Inch by 0.45-Inch XP Metal Cutting

Includes: 4-1/2 in. x 0.045 in. XP Metal Cutting Wheel (5-Pack) - DW8851B5.

  • Brand: DEWALT
  • ASIN: B005B8M2VQ
  • UPC: 885911206044

DEWALT DW4904 Crimped Wire Wheel Brush

DEWALT DW4904 Crimped Wire Wheel

DEWALT 6" Crimped bench wire wheel 5/8"-1/2" Abror, medium face, .014" Wire - DW4904

  • Brand: DEWALT
  • ASIN: B00004YMDI
  • UPC: 787721725992
Similar Stainless Steel Steel Grinding Wheel Results