Attwood 66548-3 Stainless Steel Barbed Standard Length Straight Thru-Hull, 1-Inch

Attwood 66548-3 Stainless Steel Barbed Standard Length Straight

This Attwood Stainless Steel Straight Thru-Hull Valve Fitting installs securely and provides long-term corrosion-free performance. This is a barbed, standard-length fitting for use with 1-inch interior diameter hose. This fitting has a 2 ¼-inch flange diameter, a 1 3/8-inch thread outside diameter, and 2 1/4-inch thread length. The barb is 1 ¼-inches long, and the fitting’s total length is 3 7/8-inches. The installation hole saw size is 1 ½-inches, there is a 1-inch NPSM thread, and the maximum hull thickness is 1 ¾-inch. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

  • Color: Unspecified
  • Brand: attwood
  • ASIN: B001HC0R6W
  • UPC: 022697665485

attwood Stainless Steel Barbed Short Straight Thru-Hull, 3/4-Inch

attwood Stainless Steel Barbed Short Straight Thru-Hull,

Polish your image with these beautiful, durable stainless steel fittings. Each Thru-Hull and Scupper Valve is available with a new silicone gasket and are backed by Attwood's trusted Lifetime Warranty! Why specify plastic parts when these fittings will last the life of the boat? Cast from certified enhanced #316 Stainless Steel allow for strength and lifetime corrosion-resistance. We polish all visible areas to a mirror finish, then each part through a passivation for additional protection. Thick steel sidewalls withstand continual stress and hose flexing. A channel under the flange holds a bead of sealant, making it easier to install and apply a trouble free seal. All models have wrench flats or an end notch to hold as a gripping surface. One installer can tighten all connections from inside the hull. Barbed tail ends provide plenty of room to hold multiple clamps.

  • Color: Silver
  • Brand: attwood
  • ASIN: B001HC4VIW
  • UPC: 022697665416

attwood 66553-3 Boat Self-Bailing Cockpit Barbed Stainless Steel 1 ½-Inch Scupper Valve

attwood 66553-3 Boat Self-Bailing Cockpit Barbed Stainless Steel

Designed for boats with self bailing cockpits, this stainless steel scupper valve with thru-hull fitting features a rubber flapper that opens to drain water out and closes to prevent water from washing back in. Silicone gaskets ensure a watertight seal, while barbed end accepts multiple hose clamps. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems water systems seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

  • Color: Unspecified
  • Brand: attwood
  • ASIN: B0000TX760
  • UPC: 022697665539

Mtsooning 1pc Boat Thru Hull Fitting Marine Hose Barb Connector Stainless Steel 3/4"

Mtsooning 1pc Boat Thru Hull Fitting Marine Hose

Package List: 1 Pc Boat Thru Hull Fitting Note: Please allow 1-3mm/0.04"-0.12" error due to manual measurement. Due to the different monitors and different light,the picture may not reflect the actual color of the item. Thanks for your understanding.

  • Color: silver
  • Brand: Mtsooning
  • ASIN: B07D9H31P1
  • UPC: 682698822159

Attwood 66549-3 Stainless Steel Barbed Standard Length Straight Thru-Hull, 1 1/8-Inch

Attwood 66549-3 Stainless Steel Barbed Standard Length Straight

This Attwood Stainless Steel Straight Thru-Hull Valve Fitting installs securely and provides long-term corrosion-free performance. This is a barbed, standard-length fitting for use with 1 1/8-inch interior diameter hose. This fitting has a 2 ¼-inch flange diameter, a 1 3/8-inch thread outside diameter, and 2 3/8-inch thread length. The barb is 1 ¼-inches long, and the fitting’s total length is 3 7/8-inches. The installation hole saw size is 1 ¼-inches, there is a 1-inch NPSM thread, and the maximum hull thickness is 1 ¾-inch. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

  • Color: Unspecified
  • Brand: attwood
  • ASIN: B000UAVPUO
  • UPC: 022697665492

Replacement Boat Parts Extra long 316 Stainless Steel thru hull fits 3/4" hose

Replacement Boat Parts Extra long 316 Stainless Steel

This solid cast 316 Stainless Steel thru hull fitting has a highly polished flange that makes your boat look great! Extra long threads allows it to pass through even the thickest transom, and the hose barbs fit 3/4" I.D marine hose. 316 stainless mounting nut included. (3/4" is one of the most common bilge pump sizes) These are the original equipment fittings used on many offshore salt water fishing boats! Dimensions: Outside flange diameter - 2-1/4" Thread length - 3-7/16" Overall length inside flange - 5-7/16" Required hole size - 1-3/8" Hose ID - 3/4" Need a different size? If you can't find it here, click "Contact Us" and let me know what you need!

  • Brand: Replacement Boat Parts
  • ASIN: B00FZHBO3K
  • UPC: 704660965005

Aramox Boat Hose Thru Fitting,Stainless Steel Thru-Hull Fitting Hose Barb Marine Barbed Hose Thru Drain

Aramox Boat Hose Thru Fitting,Stainless Steel Thru-Hull Fitting

Specification: Condition: 100% Brand new Size: 3/4 " Color : Silver  Material: 316 Stainless steel Application: Boats / Yachts / Cars / Trailer Package List: 1 * Boat Threaded Fitting Notice: Please allow 1slight error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures.

  • Color: popular
  • Brand: Aramox
  • ASIN: B07P66SMVB
  • UPC: 724942183071

316 Stainless Steel elbow thru hull fits 1-1/8" hose

316 Stainless Steel elbow thru hull fits 1-1/8"

This solid cast 316 Stainless Steel 90° elbow thru hull fitting has a highly polished flange that makes your boat look great! Longer thread length allows it to pass through the hull or transom and still provide plenty of room to attach the hose. Hose barbs fit 1-1/8" I.D marine hose. 316 stainless mounting nut included. These are the original equipment fittings used on many offshore salt water fishing boats! Dimensions: Outside flange diameter - 2-1/4" Thread length - 1-7/16" Overall length inside flange to bottom of hose barb - 4" Required hole size - 1-5/16" Hose ID - 1-1/8" Need a different size? If you can't find it here, click "Contact Us" and let me know what you need!

  • Brand: Replacement Boat Parts
  • ASIN: B00FZHBMAA
  • UPC: 704660964961

316 Stainless Steel thru hull scupper fits 1-1/2" hose

316 Stainless Steel thru hull scupper fits 1-1/2"

This solid cast 316 Stainless Steel thru hull scupper has an internal flapper to keep water from back-flowing and a highly polished flange that makes your boat look great! The long threads allow it to pass through thicker transoms and the hose barbs fit 1-1/2" I.D marine hose. 316 stainless mounting nut included. These are the original equipment fittings used on many offshore salt water fishing boats! Dimensions: Outside flange diameter - 3" Thread length - 3" Overall length inside flange - 5-1/4" Required hole size - 1-7/8" Hose ID - 1-1/2" Flapper diameter - 1-7/16" These scuppers last almost forever, but the flappers don't. If you just need the flapper, why spend the extra $$$... just order our #PRE56553KT flapper replacement kit! Need a different size? If you can't find it here, click "Contact Us" and let me know what you need!

  • Brand: Replacement Boat Parts
  • ASIN: B00FZHB88G
  • UPC: 704660965036

316 Stainless Steel elbow thru hull fits 1-1/2" hose

316 Stainless Steel elbow thru hull fits 1-1/2"

This solid cast 316 Stainless Steel 90° elbow thru hull fitting has a highly polished flange that makes your boat look great! Longer thread length allows it to pass through the hull or transom and still provide plenty of room to attach the hose. Hose barbs fit 1-1/2" I.D marine sanitation hose. 316 stainless mounting nut included. These are the original equipment fittings used on many offshore salt water fishing boats! Dimensions: Outside flange diameter - 3" Thread length - 2" Overall length inside flange to bottom of hose barb - 6" Required hole size - 2-1/4" Hose ID - 1-1/2" Need a different size? If you can't find it here, click "Contact Us" and let me know what you need!

  • Brand: Replacement Boat Parts
  • ASIN: B00FZHBMPA
  • UPC: 704660964978

attwood 66547-3 Stainless Steel Straight Thru-Hull Valve Fitting, Barbed, Standard Length, for 3/4-Inch Interior Diameter Hose

attwood 66547-3 Stainless Steel Straight Thru-Hull Valve Fitting,

This Attwood Stainless Steel Straight Thru-Hull Valve Fitting installs securely and provides long-term corrosion-free performance. This is a barbed, standard-length fitting for use with 3/4-inch interior diameter hose. This fitting has a 1 7/8-inch flange diameter, a 1-inch thread outside diameter, and 2-inch thread length. The barb is 1 ¼-inches long, and the fitting’s total length is 3 3/4-inches. The installation hole saw size is 1 1/8-inches, there is a 3/4-inch NPSM thread, and the maximum hull thickness is 1 5/8-inch. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

  • Color: Unspecified
  • Brand: attwood
  • ASIN: B000UAXSKY
  • UPC: 022697665478

Attwood 66551-3 Stainless Steel Barbed Standard Length Straight Thru-Hull, 1 1/2-Inch

Attwood 66551-3 Stainless Steel Barbed Standard Length Straight

This Attwood Stainless Steel Straight Thru-Hull Valve Fitting installs securely and provides long-term corrosion-free performance. This is a barbed, standard-length fitting for use with 1 1/2-inch interior diameter hose. This fitting has a 3-inch flange diameter, a 1 7/8-inch thread outside diameter, and 2 1/2-inch thread length. The barb is 1 ¼-inches long, and the fitting’s total length is 4 1/8-inches. The installation hole saw size is 2-inches, there is a 1 1/2-inch NPSM thread, and the maximum hull thickness is 1 7/8-inch. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

  • Color: Unspecified
  • Brand: attwood
  • ASIN: B001HC6XLU
  • UPC: 022697665515

Ting Ao Boat Thru Hull Fitting Hose Barb Drain Marine Yacht 316 Stainless Steel (1 in)

Ting Ao Boat Thru Hull Fitting Hose Barb

Features: Material: AISI stainless steel 316 Lost wax process and polished For Pipe1/2" 1" 3/4" 1-1/2" Package includes One Piece

  • Brand: Ting Ao
  • ASIN: B07CH3GF3H

316 Stainless Steel thru hull fits 1-1/8" hose

316 Stainless Steel thru hull fits 1-1/8"

This solid cast 316 Stainless Steel thru hull fitting has a highly polished flange that makes your boat look great! The standard length threads fit most applications and the hose barbs fit 1-1/8" I.D marine hose. The hose barbs are long enough to double clamp if needed. 316 stainless mounting nut included. These are the original equipment fittings used on many offshore salt water fishing boats! Dimensions: Outside flange diameter - 2-1/4" Thread length - 1-3/8" Overall length inside flange - 3-7/8" Required hole size - 1-5/8" Hose ID - 1-1/8" Need a different size? If you can't find it here, click "Contact Us" and let me know what you need!

  • Brand: Replacement Boat Parts
  • ASIN: B00FZHBG38
  • UPC: 704660964831

316 Stainless Steel thru hull fits 5/8" hose

316 Stainless Steel thru hull fits 5/8"

This solid cast 316 Stainless Steel thru hull fitting has a highly polished flange that makes your boat look great! The standard length threads fit most applications and the hose barbs fit 5/8" I.D marine hose. The hose barbs are long enough to double clamp if needed. 316 stainless mounting nut included. These are the original equipment fittings on many offshore salt water fishing boats! Dimensions: Outside flange diameter - 1-7/8" Thread length - 1-3/16" Overall length inside flange - 3-3/8" Required hole size - 13/16" Hose ID - 5/8" Need a different size? If you can't find it here, click "Contact Us" and let me know what you need!

  • Brand: Replacement Boat Parts
  • ASIN: B00FZHBESA
  • UPC: 704660964800
Similar Stainless Steel Thru Hull Results