Carbon Steel Taper Pin Assortment (100 Pieces), Plain Finish, Inch, With Case

Carbon Steel Taper Pin Assortment (100 Pieces), Plain

The 100-piece carbon steel taper pin assortment with plain finish includes taper pins in various sizes and comes in a compartmented plastic case for storage and organization. Each pin is tapered consistently at 1/4" for every 12" length. The pins are made from carbon steel for strength. The material is magnetic.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place. Taper pins are tapered consistently across the body of the pin so that one end has a slightly larger diameter than the other. Spring pins are slotted or coiled to expand to fit the diameter of a hole, which should...

  • Brand: Small Parts
  • ASIN: B00065UZKE
  • UPC: 698158129072

Drill America #2/0 High Speed Steel Spiral Flute Taper Pin Reamer, DWR Series

Drill America #2/0 High Speed Steel Spiral Flute

Drill America DWRRTPS series Qualtech High-Speed Steel taper pin reamer. This tapered reamer turns a straight hole into a tapered hole into which standard taper pins will fit. The straight-flute reamers are generally used by hand while the helical-flute is designed for machine use. The square on the shanks of the straight fluted are suitable for holding in a tap wrench or vise. The spiral flute taper pin reamer is recommended for applications where the reamer tends to wedge itself. 0.2071-inches short end and 0.2604-inches large end.

  • Brand: Drill America
  • ASIN: B00FXJO752
  • UPC: 887861148207

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #6 Pin Size, 0.341" Large End Diameter, 0.299" Small End Diameter, 2" Length (Pack of 10)

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2,

The steel taper pin has a plain finish, meets American Society of Mechanical Engineers (ASME) B18.8.2 specifications, and has a standard tolerance. The taper pin has a diameter that tapers along the length of the pin for installing in tapered holes to position and secure components. Steel is often used in applications where strength is the primary consideration.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place.

  • Brand: Small Parts
  • ASIN: B00EB1OIYI

Drill America #2/0 High Speed Steel Straight Flute Taper Pin Reamer, DWR Series

Drill America #2/0 High Speed Steel Straight Flute

Drill America DWRRTP series Qualtech High-Speed Steel taper pin reamer. This tapered reamer turns a straight hole into a tapered hole into which standard taper pins will fit. The straight-flute reamers are generally used by hand while the helical-flute is designed for machine use. The square on the shanks of the straight fluted are suitable for holding in a tap wrench or vise. This reamer is recommended for most materials. 0.0719-inches short end and 0.0966-inches large end.

  • Brand: Drill America
  • ASIN: B00FXJLCQO
  • UPC: 887861147774

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #5/0 Pin Size, 0.094" Large End Diameter, 0.073" Small End Diameter, 1" Length (Pack of 25)

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2,

The steel taper pin has a plain finish, meets American Society of Mechanical Engineers (ASME) B18.8.2 specifications, and has a standard tolerance. The taper pin has a diameter that tapers along the length of the pin for installing in tapered holes to position and secure components. Steel is often used in applications where strength is the primary consideration.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place.

  • Brand: Small Parts
  • ASIN: B00EB1LT5E

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #4 Pin Size, 0.25" Large End Diameter, 0.219" Small End Diameter, 1-1/2" Length (Pack of 25)

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2,

The steel taper pin has a plain finish, meets American Society of Mechanical Engineers (ASME) B18.8.2 specifications, and has a standard tolerance. The taper pin has a diameter that tapers along the length of the pin for installing in tapered holes to position and secure components. Steel is often used in applications where strength is the primary consideration.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place.

  • Brand: Small Parts
  • ASIN: B00EB1NQPK

Drillco 4550E Series High-Speed Steel Taper Pin Reamer, Spiral Flute, Round with Square End Shank, Uncoated (Bright)/Black Oxide Finish, 2/0 Size, 2-9/16" Length

Drillco 4550E Series High-Speed Steel Taper Pin Reamer,

Taper Pin Reamers are manufactured with a taper of 1/4-inches per foot. They are used to ream holes into which standard taper pins will fit. The point of each reamer will enter hole reamed by the next smaller size. Hole to be reamed should be a few thousands smaller than the small diameter of the finished reamed hole. Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer of the part is rotated. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Available in uncoated (bright) and black oxide finish. Comes with round shank with square end. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

  • Brand: Drillco
  • ASIN: B00GR5X3VK
  • UPC: 045997190648

18-8 Stainless Steel Externally Threaded Taper Pin With Hex Nut, Plain Finish, Standard Tolerance, #8 Pin Size, 7/16"-20 Thread Size, 0.490" Large End Diameter, 0.448" Small End Diameter, 2" Length

18-8 Stainless Steel Externally Threaded Taper Pin With

The 18-8 stainless steel externally threaded taper pin with hex nut has a plain finish and a standard tolerance. The pin and hex nut can be installed in and removed from holes with only one-sided access to position and secure components. The pin has a diameter that tapers along its length for installing in tapered holes. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place.

  • Brand: Small Parts
  • ASIN: B00EB1SZH4

18-8 Stainless Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #1 Pin Size, 0.172" Large End Diameter, 0.11" Small End Diameter, 3" Length (Pack of 5)

18-8 Stainless Steel Taper Pin, Plain Finish, Meets

The 18-8 stainless steel taper pin has a plain finish, meets American Society of Mechanical Engineers (ASME) B18.8.2 specifications, and has a standard tolerance. The taper pin has a diameter that tapers along the length of the pin for installing in tapered holes to position and secure components. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place.

  • Brand: Small Parts
  • ASIN: B00EB1FIV0

18-8 Stainless Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #0 Pin Size, 0.156" Large End Diameter, 0.14" Small End Diameter, 3/4" Length (Pack of 10)

18-8 Stainless Steel Taper Pin, Plain Finish, Meets

The 18-8 stainless steel taper pin has a plain finish, meets American Society of Mechanical Engineers (ASME) B18.8.2 specifications, and has a standard tolerance. The taper pin has a diameter that tapers along the length of the pin for installing in tapered holes to position and secure components. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place.

  • Brand: Small Parts
  • ASIN: B00EB1F1RQ

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #6 Pin Size, 0.341" Large End Diameter, 0.305" Small End Diameter, 1-3/4" Length (Pack of 25)

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2,

The steel taper pin has a plain finish, meets American Society of Mechanical Engineers (ASME) B18.8.2 specifications, and has a standard tolerance. The taper pin has a diameter that tapers along the length of the pin for installing in tapered holes to position and secure components. Steel is often used in applications where strength is the primary consideration.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place.

  • Brand: Small Parts
  • ASIN: B00EB1OHPS

GEARWRENCH 82307 4 Piece Long Taper Punch Set

GEARWRENCH 82307 4 Piece Long Taper Punch

GearWrench introduced the original patented five-degree ratcheting wrench in 1996 and quickly became a go-to brand for professional automotive technicians. The innovation didn't stop there. Year after year, the GearWrench brand continues to expand its line-in ratcheting tools and beyond-to help automotive and industrial technicians get their jobs done faster and easier. Includes: 1/8" x 8" x 3/8" Long Taper Punch, 5/32" x 8-1/2" x 1/2" Long Taper, 3/16" x 9" x 1/2" Long Taper Punch, 1/4" x 11" x 5/8" Long Taper Punch.

  • Brand: GearWrench
  • ASIN: B004QXT00I
  • UPC: 099575823077

18-8 Stainless Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #4/0 Pin Size, 0.109" Large End Diameter, 0.099" Small End Diameter, 1/2" Length (Pack of 10)

18-8 Stainless Steel Taper Pin, Plain Finish, Meets

The 18-8 stainless steel taper pin has a plain finish, meets American Society of Mechanical Engineers (ASME) B18.8.2 specifications, and has a standard tolerance. The taper pin has a diameter that tapers along the length of the pin for installing in tapered holes to position and secure components. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place.

  • Brand: Small Parts
  • ASIN: B00EB1ECQW

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2, Standard Tolerance, #10 Pin Size, 0.706" Large End Diameter, 0.56" Small End Diameter, 7" Length

Steel Taper Pin, Plain Finish, Meets ASME B18.8.2,

The steel taper pin has a plain finish, meets American Society of Mechanical Engineers (ASME) B18.8.2 specifications, and has a standard tolerance. The taper pin has a diameter that tapers along the length of the pin for installing in tapered holes to position and secure components. Steel is often used in applications where strength is the primary consideration.Pins are non-threaded cylindrical fasteners that are inserted into one or more holes to fix a component's position, join components, or maintain alignment between them. Several different pin styles fit a variety of application and installation requirements. Dowel pins, for example, have a solid shaft that is often rounded or beveled at the ends. Quick-release pins have a button, handle, or ring at one end that releases retractable balls at the other end to act as a lock-and-release mechanism. Clevis pins have a head at one end and one or more cross holes at the other end that allow insertion of cotter pins to lock components in place. Cotter pins have two prongs that can be inserted into the hole of clevis pins or other fasteners and bent to secure them in place.

  • Brand: Small Parts
  • ASIN: B00EB1QHJW

TEKTON 66175 3/16-Inch Alignment Punch

TEKTON 66175 3/16-Inch Alignment

To align pieces for accurate fastening or welding, drive the self centering TEKTON 3/16 inch Alignment Punch through holes in two or more parts. Its long, gradual taper creates the mechanical advantage to position heavy parts and the length to reach through thick pieces. This type of punch is a little different than other common styles. It is specifically designed for positioning parts, not for driving out pins, rivets or bolts. In fact, the tip should never have any contact force applied to it. The tip and tapered shaft are precisely machined to meet exacting size tolerances, ensuring they are straight and true. Made from premium, high carbon steel, each punch is individually heat treated creating a strong, hardened tip while keeping the soft temper of the striking end, allowing it to absorb hammer blows without chipping. Made in USA.

  • Color: N/A
  • Brand: TEKTON
  • ASIN: B00QV2I242
  • UPC: 020209661758
Similar Steel Taper Pins Results