Surface Mount Corner Brackets for Table Aprons

Surface Mount Corner Brackets for Table

  • ASIN: B002L6K5G0
  • UPC: 733175242790

Anwenk Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate 5/16" (M8) Sofa Legs with Hanger Bolts,Screws,Strengthen Weak Furniture Repair Damaged Sofa Couch Seat,Set of 4

Anwenk Leg Mounting Plates, Furniture Leg Attachment Plates

When You Will Need Furniture Legs Attachment Mounting Plate Attachment points on furniture are damaged or missing the threaded nut ,T-Nut become loose or cannot be installed that your furniture becomes so weak and wobbly. These leg attachment plates can help repair and strengthen your furniture by simply attaching them over the existing hole in the leg frame for standard 5/16"(metric 8mm) center to accept your furniture legs. Convert Furniture from M10 to U.S. Standard M8 Holes Some European imported furniture (Ikea, Natuzzi, etc.) pre-drilled sofa legs with M10(10mm) wide bolt. While U.S. standard is 5/16" (Known as M8)wide bolt. Using a set of T-Plates centered over the existing hole in your furniture and you can adapt your furniture to accept M8 hanger bolts. Note: These T-plates are 2" by 2" and fit most sofa/couches/seats/ottomans in market because they can fit over existing and damaged holes in the frame. They do not fit for large legs which the pre-drilled holes are over 2" by 2". What You Get 4 X sofa leg mounting plates 4 X 5/16" (M8) hanger bolts 4 X 5/16" (M8) female adaters 16 x screw adapters for 5mm unthreaded holes

  • Color: M8 Leg Mounting Plates
  • Brand: Anwenk
  • ASIN: B01HTWQFKA

Pack of 4 Folding Brackets Lock Extension Support for Table Bed Leg Bronze Steel Foldable Hinge Hardware with Screws, Bronze

Pack of 4 Folding Brackets Lock Extension Support

  • Brand: Skelang
  • ASIN: B07G2BXCJF
  • UPC: 736140236640

4x4 Post Support Table Leg Bracket (Actual Size 3.5"x3.5") Post and Screws NOT Included!

4x4 Post Support Table Leg Bracket (Actual Size

▼READ THIS FULLY TRIMMING IS REQUIRED ▼New Stylish Contoured Base ▼Read Full Description Prior To Purchase.▼TRIMMING POSTS IS REQUIRED depending on post type...... DO NOT FORCE POSTS INTO SUPPORTS!......... Support flange for permanent or temporary hand, fence, deck, porch railing or post less than 36" tall.... ...... This product fits a standard 4 x 4 post (3.5" x 3.5"). Some sanding or trimming may be required as 4 x 4 post are not always consistent in size........... ▼Made from paintable durable Nylon + Glass-Fiber. NO fading, aging, and weakening from sun exposure. Meets or exceeds common Construction Codes.......... Heavy Duty High Impact ABS Plastic Provides Immense Strength That Will Last For Decades Under Practical Installation and Use....... ▼*****Depending on mills standards some sanding may be required for fit. ▼Need help confirming if this product is what you need? Send us some pictures or questions relating to your project and we can help advise the ideal use of this item. Ideal for use as base support for installations that have proper structural framing and structural members. ▼Proper structural design for safety must be used. Always follow building and safety codes when using post supports ++++++++Provides 20 countersunk screw holes for a strong ho...

  • Brand: Wizard Distribution
  • ASIN: B06W53CML2
  • UPC: 721633121893

Lock Extension Table Bed Leg Feet Steel Folding Foldable Support Bracket Screw B (4 Pcs, GunBlack)

Lock Extension Table Bed Leg Feet Steel Folding

  • Color: Gunblack
  • Brand: Yephets
  • ASIN: B06VTJZHS6

4 PCS Folding Bracket, TopDirect Iron Folding Lock Extension Table Chair Bed Leg Foldable Support Brackets Hinge Self Lock Hinges with Screws

4 PCS Folding Bracket, TopDirect Iron Folding Lock

TopDirect folding brakes can adjust the new ideas of the table legs, breaking the traditional table fixed height restrictions, the design of the 90 degree folding legs of the concept, to accurately meet your table at different levels of use requirements. Features: - Material: Steel plate - Size: 75 x 62 x 55mm(2.95" x 2.44" x 2.16"), 2.5mm(0.098") thickness. - Each bracket could hold 500lb and the lock in the 90 degree position. - Self Lock: When fold the leg, the bracket will be locked automatically, each bracket comes with 10 screws. - Use for table, DIY home made table, folding partition frame, folding door, anywhere need to use for extension table bed leg feet, etc. Package included: 4 x Folding Table Leg Brackets 40 x Screws

  • Brand: TopDirect
  • ASIN: B07DFGCJ9K
  • UPC: 687345901119

Corner Brace, Table Leg (1)

Corner Brace, Table Leg

Install Hafele's excellent quality corner brace at you table leg. The corner brace is very durable, steel, galvanized 40mm. Simple and economical attachment of the table legs to frame. The table leg is secured using the center hole.

  • Color: Galvanized steel
  • Brand: Hafele
  • ASIN: B003FHS714

8 PCS Heave Duty Corner Brace, FANDAMEI 40x40mm Stainless Steel Joint Right Angle Brackets with Screws, 90 Degree Wall Brackets Hanger for Shelves, Tables,Dressers&Chairs Silver

8 PCS Heave Duty Corner Brace, FANDAMEI 40x40mm

Advantages: 1. This "L" pattern corner brace is designed to be thicker than most corner braces in market, aim to support heavy weight up to 38lb 2. Widely used in wooden furniture repairing,fixing, and installing,Such as table legs, chairs, beds, shelves,windows, etc. 3. Reliable quality, brushed finish stainless steel can prevent from being rusty and scratched. Perform a very elegant& aesthetic look on any furniture 4. Humanized package content, includes all the screws you need to fix the brace, 8 corner braces with 32 pcs screwsInstall Direction Step 1: Drill a 20mm long holes on the wall or wooden board Step 2: Use a brush to clean the dirt in the hole Step 3: Nail the screw through the brace hole Step 4: Punch the screw into the drill hole with a hammer Step 5: Fix the bracket with a cross screwdriver Specification Product name: Heavy Duty corner Brace Brand name: Teenitor Material: stainless steel Maximum support Weight: 38lb for a pair of corner bracket "L" corner brace size: 40*40*20mm(L*H*W) corner brace hole dia: 5 mm Thickness: 3mm Hole Quantity : 4 HolesM4 screw length: 20mm M4 screw dia: 7mm Package Include: 8 Pcs Heave duty corner braces 32 Pcs stainless steel M4 screws

  • Brand: FANDAMEI
  • ASIN: B07N1KJBSW

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

11 Degree Angled Leg Mounting Plates, Furniture Leg

When You Will Need Furniture Legs Attachment Mounting Plate Attachment points on furniture are damaged or missing the threaded nut ,T-Nut become loose or cannot be installed that your furniture becomes so weak and wobbly. These leg attachment plates can help repair and strengthen your furniture by simply attaching them over the existing hole in the leg frame for standard 5/16" center to accept your furniture legs. Convert Furniture from M10 to U.S. Standard M8 Holes Some European imported furniture (Ikea, Natuzzi, etc.) pre-drilled sofa legs with M10(10mm) wide bolt. While U.S. standard is 5/16" (Known as M8)wide bolt. Using a set of T-Plates centered over the existing hole in your furniture and you can adapt your furniture to accept 5/16" hanger bolts. Note: They are not straight but 11 degree angled let mounting plates.Search"B01HTWQFKA" for straight leg mounting plates. These T-plates are 2" by 2" and fit most sofa/couches/seats/ottomans in market because they can fit over existing and damaged holes in the frame. They do not fit for large legs which the pre-drilled holes are over 2" by 2". What You Get 4 X sofa leg mounting plates 4 X 5/16" (M8) hanger bolts 4 X 5/16" (M8) female adaters 16 x screw adapters for 5mm unthreaded holes

  • Color: Silver
  • Brand: Anwenk
  • ASIN: B071DJQFY5

4X Iron Locking Folding Table Chair Leg Brackets Hinge Self Lock Foldable Hinges

4X Iron Locking Folding Table Chair Leg Brackets

Item Descriptions:-100% Brand new and high quality!-Suitable for Folding Table/Chair.-Foldable, with locking in on and unfolded state-Notice:-The color may have different as the difference display,pls understand.-Size: 75mm x 60mm x 55mm/3'' x 2.4'' x 2.2''(L*W*H)Package:4 x Folding Table Leg BracketsItem Specifications:Material:IronSize:3'' x 2.4'' x 2.2''(L*W*H)Theme:Home DIYBrand:Unbranded/Generic

  • Brand: Micro Trader
  • ASIN: B073B28XZG
  • UPC: 730052881608

2 Pack - (1.5" Wide - 3/16" Thick Metal) (Size Range: 8-12"L x 8-24"H) U Shape Legs, Hairpin Legs, Coffee Table Legs, Furniture Legs, Bench Legs, Desk Legs, Industrial Modern, Home, DIY

2 Pack - (1.5" Wide - 3/16" Thick

This Listing is for one set of 2 bracket Legs. Each number quantity represents how many bracket sets you would like. For Example: "Quantity: 1 = One Bracket set (2 Legs). Quantity: 2 = Two Bracket sets (4 Legs) And so on..." Metal Size: 1.5" Wide x 3/16" Thick & 3" Lip on top with 1/8" holes drilled. Weight Limit: Varies in size you pick. But have been tested with 200+lbs Color: Raw Rusty Metal. Surface Texture: flat textured. Stain/Coat: Clear Semi-Gloss coated. Weather Proof: Yes, Indoor or outside. ***Mounting hardware is not included, because every bench/table is different... You need to use appropriate screws for your project***

  • Color: Rusty Raw Steel Clear Coated Sealed
  • Brand: Csonka's Custom Rustics
  • ASIN: B01GQV3KSA

VintageBee 4 Pack Lock Extension Table Bed Leg Feet Steel Folding Foldable Support Bracket Screw (Galvanized)

VintageBee 4 Pack Lock Extension Table Bed Leg

VintageBee 4 PACK Lock Extension Table Bed Leg Feet Steel Folding Foldable Support Bracket Screw (Galvanized)

  • Color: Galvanized
  • Brand: VintageBee
  • ASIN: B07JJS68PM
  • UPC: 723990251398

2'' x 4-1/2'' Kerf Mount Corner Bracket, Set of 4

2'' x 4-1/2'' Kerf Mount Corner Bracket, Set

Corner braces will make your table stronger. This bracket is kerf mounted and made of 18 gauge steel and is 2" X 4-1/2". * Wing Nuts and Hanger Bolts are sold separately. * Sold in set of 4. Available in other sizes: * #34303 is kerf mounted and made of 14 gauge steel and is 3" X 4-3/4" and includes two holes for hanger bolts. * #24281 is kerf mounted and made of 18 gauge steel and is 1-1/2" X 3".

  • Brand: Rockler
  • ASIN: B001HMZCXK

Furniture Leg Mounting Plates, Sofa Leg Attachment Plates, 5/16" Hanger Bolts Screws Adapters, Metal Plates Bracket, Repair kit for Couch Chair (Set of 4)

Furniture Leg Mounting Plates, Sofa Leg Attachment Plates,

All accessories you need to install of repair the furniture legs are included in the kit, so you don't need to run to local hardware store 3 times. 4x flat mounting plates 4x 5/16 inch threaded insert nuts fasteners 16x screws for fastening the mounting plates Functional repair kit for furniture legs: To fix the loose old legs, for you to sit securely and tight. To add strength to the furniture, no more wobbly couches. To install the new furniture legs, get a new look or raise the height for your need. To retrofit and extend the life of the old couch, love seat. To convert European furniture feet To U.S standard measurements Easy to use: You may not need all the accessories. The extra tool you need is a screwdriver. For Installation of new legs: If you are installing new furniture legs, which are already attached with hanger bolt, then follow these steps.Drill a hole a little over a half inch deep where the leg was to go and screw in the female insert nuts, then add the plate to the right position, screw in the bolts on the legs into the plate and the insert nuts. Give it a strong, tight fit.

  • Brand: Sopicoz
  • ASIN: B07MR21BCK

Leg Daddy 5/16" T-Plate Sofa Leg Attachment Plates, Set of 4

Leg Daddy 5/16" T-Plate Sofa Leg Attachment Plates,

T-Plate Purpose Designed for attaching sofa legs to new or damaged sofas, couches, love seats, and ottomans. These plates have 5/16" Threaded centers for easily attaching hanger-bolt style legs, and they attach to your sofa with four screws placed directly into the wood frame of the couch. The Solution for Damaged Hangar Bolt Sofa Leg Attachment Points If your sofa is so damaged that a T-Nut will not attach to your sofa, we recommend the T-Plate Sofa Leg Attachment Plate. This plate installs on your sofa over the old T-Nut hole. These plates have 5/16" threaded centers for easily attaching hanger-bolt style legs. They attach to your sofa with three screws placed directly into the wood frame of the couch. Your standard 5/16" hanger bolt sofa leg will then screw into the threaded 5/16" center of the T-Plate. Can Be Used in Place of T-Nuts If your existing T-Nuts have worked loose and your legs won't stay in place, this is a great option for repairing the sofa and keeping your legs in place.

  • Brand: Leg Daddy
  • ASIN: B00EAYNXB0
  • UPC: 795654973809
Similar Table Leg Brackets Results