THE CIMPLE CO - Coaxial F Type (F-Pin / F81) 75 Ohm Terminator with Resistor for Coax and RF - Install on Unused Ports in Your Cable, Satellite, Antenna, or Other RF System - Pack of 4

THE CIMPLE CO - Coaxial F Type (F-Pin

THE CIMPLE CO, A Family Company located in the USA, is proud to manufacture this high quality and durable coaxial F-pin Terminators. Also known as Dummy Loads, terminators are an essential component in the proper termination of unused outputs of line splitters, LNBs, Satellite connections, switches, amplifiers, etcÉ All connections which utilize a Type F interface. Available in packages of 1-1000 pieces (including our most popular kits of 5, 10, 25, and 100. Also used to terminate and maintain balance in SMATV, CATV, CCTV, and other video systems. These help to eliminate ingress and egress in many types of systems. Designed to terminate RF signals on unused equipment ports to prevent extraneous signals from decreasing system performance. Rated at 75 Ohms, these are used for termination on F type connections. High return loss for improved signal quality that minimizes ghosting, double screen, and other image problems.

  • Color: 75 Ohm Terminator
  • Brand: THE CIMPLE CO
  • ASIN: B01K6M2X4M
  • UPC: 783629445697

150W 50ohm DC 3GHz 150N50F RF Termination Microwave Resistor Dummy Load RFP Copper

150W 50ohm DC 3GHz 150N50F RF Termination Microwave

We will test it before shipment. Reference Weight:0.013kg (0.03lb.) Descriptions: The G150N50W4E is high performance Aluminum Nitride (AlN) flange mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO). The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling makes the part ideal for terminating circulators and for use in power combiners. The termination is also RoHS compliant! Features: RoHS Compliant 150 Watts DC - 3.0 GHz AlN Ceramic Non-Nichrome Resistive Element Low V SWR 100% Tested Specifications: Resistive Element :Thick Film Substrate :AlN Ceramic Mounting Flange : Nickel Plated Copper Operating Temperature:-50 to +150°C (see de rating chart) Tolerance is :±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches Electrical Specifications: Resistance Value: 50 Ohms, ±2% Power: 150 Watts Frequency Range: DC - 3.0 GHz Return Loss:25dB DC - 2.0 GHz 20dB DC - 3.0 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Package Included: 1 x DC-3GHz RF Termination Microwave Resistor Dummy Load RFP 150N50F ...

  • Brand: MIZOELEC
  • ASIN: B07L6Q96G4

IEC 60301 Ed. 2.0 b:1971, Preferred diameters of wire terminations of capacitors and resistors

IEC 60301 Ed. 2.0 b:1971, Preferred diameters of

Presents preferred diameters in tabular form in the metric and inch-pound unit sizes. This title may contain less than 24 pages of technical content.

  • ASIN: B000Y2SGMI

Maretron TR-CM Termination Resistor, Micro, Male

Maretron TR-CM Termination Resistor, Micro,

Micro termination resistor, male, MFG TR-CM.

  • Brand: Maretron
  • ASIN: B00MYSMD2E

Maretron Micro Termination Resistor - Female

Maretron Micro Termination Resistor -

Micro Termination ResistorsTermination Resistors are required on a NMEA 2000® work and are placed at each end of a work trunk cable. Like the double-ended cordsets the termination resistors are waterproof and continue to function even while submerged in the bilge.Screw terminal connector for positive connectionsTermination resistors are used to terminate both ends of the trunk line Product : MARETRON MICRO TERMINATION RESISTOR (FEMALE) Manufacturer : MARETRON Manufacturer Part No : TR-CF UPC : 873804001661

  • Brand: Maretron
  • ASIN: B009YN6SFK
  • UPC: 611104340857

ICP DAS USA ICP-SG-785: RS-485 pull-high/pull-low and termination resistor module

ICP DAS USA ICP-SG-785: RS-485 pull-high/pull-low and termination

The SG-785 is an optional module that is used to improve the communication of the RS-485 network. It provides switch selectable pull-high and pull-low resistors on the RS-485 network. It also has 15-step switch selectable termination resistor such that the user can select a proper termination resistor to be connected to the RS-485 network easily.

  • Color: Red
  • Brand: ICP DAS
  • ASIN: B00N37CV0O

KIMME 1Pc RF Termination Microwave Resistor Dummy Load RFP 250N50 250W 50ohms DC-3GHz Drop Ship

KIMME 1Pc RF Termination Microwave Resistor Dummy Load

1Pc RF Termination Microwave Resistor Dummy Load RFP 250N50 250W 50ohms DC-3GHz Drop ship

  • Brand: KIMME
  • ASIN: B07NPT97RJ

RESISTOR 22 OHM 5% CONCAVE TERMINATIONS CAT16-220J4LF 16220J4

RESISTOR 22 OHM 5% CONCAVE TERMINATIONS CAT16-220J4LF

BOURNS - CAT16-220J4LF - RESISTOR; ISO RES ARRAY 4; 22 OHM 5%; 1206

  • Brand: Bourns
  • ASIN: B019HBGGBY

5 Pin XLR with DMX Termination Resistor - 120 Ohm-by-TecNec

5 Pin XLR with DMX Termination Resistor -

5 Pin XLR with DMX Termination Resistor - 120 Ohm.

  • Brand: TecNec
  • ASIN: B00HRNRUQK
  • UPC: 013167001339

IEC 60717 Ed. 1.0 b:1981, Method for determination of the space required by capacitors and resistors with unidirectional terminations

IEC 60717 Ed. 1.0 b:1981, Method for determination

Applies to capacitors and resistors with unidirectional terminations intended for use in electronic equipment. This title may contain less than 24 pages of technical content.

  • ASIN: B000Y2LM7Y

ICP DAS USA's tM-SG4 RS-485 Pull-high/Pull-low and Termination Resistors Module. Improves RS-485 signal by reducing noise in RS-485 signal

ICP DAS USA's tM-SG4 RS-485 Pull-high/Pull-low and Termination

The tM-SG4 is an optional module that is used to improve the communication of RS-485 network. It provides switch selectable pull-high and pull-low resistors on RS-485 network. It also has 15-step switch selectable termination resistor such that the user can select a proper termination resistor to be connected to the RS-485 network easily. If the RS-485 network is not over 100 meters, the termination resistors are not needed. Otherwise, it may be necessary to insert two termination resistors at both end of the RS-485 network. It is not easy to calculate the value of a termination resistor on the RS-485 network. The best way to do this is to use an oscilloscope to check the RS-485 signal directly. If the impedance match of RS-485 network is OK, the oscilloscope will show a very nice square wave. If these square wave signals are distorted, the user will need to insert two termination resistors at both end of the RS-485 network

  • Brand: ICP DAS
  • ASIN: B014K1JGC2

Ximimark 2Pcs RF Termination Microwave Resistor Dummy Load RFP 250N50 250W 50ohms DC-3GHz

Ximimark 2Pcs RF Termination Microwave Resistor Dummy Load

Specifications: Material: Electrical components The working temperature: -55 ° ~ +155 ° Size: 25 * 10 MM/098*0.39inch Aperture: 3MM/0.12inch Note: Manual measurement, with small error. Please check size in detail before purchase. Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness. We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution. Package Includes:2Pcs

  • Brand: Ximimark
  • ASIN: B07HQ8HMJ4
  • UPC: 657835621407

Active Termination Resistor for PROFIBUS and RS-485 Bus Systems. Compact Design, Electrical Isolation Between Supply and Data Interface, Bus Termination can be Activated (PSI-Terminator-PB)

Active Termination Resistor for PROFIBUS and RS-485 Bus

Active termination resistor for PROFIBUS and RS-485 bus systems. Compact design, electrical isolation between supply and data interface, bus termination can be activated, integrated programming interface.Specification: ECCN: : EAR99 Alias/AKA: : 2313944 Unit of Measure: : Per Each

  • ASIN: B07RZBJLZB

Hosa DMT-414 3-Pin DMX-512 XLR3M Terminator

Hosa DMT-414 3-Pin DMX-512 XLR3M

This adaptor is designed to terminate a 3-pin DMX-512 daisy chain. It features a 120-ohm resistor for a safe termination.

  • Color: Original Version
  • Brand: Hosa
  • ASIN: B000PO1H94
  • UPC: 666671366823

5pcs Rf Adapter BNC Plug Resistor Coaxial Electronics Termination Impedance 50 Ohm Copper Alloy Connector Ships from USA

5pcs Rf Adapter BNC Plug Resistor Coaxial Electronics

High Quality 5pcs Rf Adapter BNC Plug Resistor Coaxial Electronics Termination Impedance 50 Ohm Copper Alloy Connector Ships from USA

  • Brand: Custom Cables Group LLC
  • ASIN: B075WGVDZ1
Similar Termination Resistor Results