Five Oceans Black Straight Thru-Hull Connection for Hose, 3/4" FO-2995

Five Oceans Black Straight Thru-Hull Connection for Hose,

This Five Oceans Thru-hulls for hose gives the look of stainless steel without the cost. Nylon plumbing fittings like these cost less than similar fittings made of Marelon or Bronze. Uses include scupper, sink drain and bilge pump overboard discharge. Not recommended for use below waterline.SPECIFICATIONS:Hose Size: 3/4"Mounting Hole Diameter: 1 1/4"Material: Nylon & Stainless Steel Color: BlackType: Thru-Hull Fittings PRODUCT NUMBER: FO-2995

  • Color: grey / polished
  • Brand: Five Oceans
  • ASIN: B00D2ZYP06
  • UPC: 029882558409

attwood Stainless Steel Barbed Standard Length Straight Thru-Hull, 1 1/4-Inch

attwood Stainless Steel Barbed Standard Length Straight Thru-Hull,

Rugged stainless construction. Cast from certified enhanced #316 stainless steel allow for strength and lifetime corrosion-resistance. Solid silicone gasket. Gasket is dimensionally stable--will not deteriorate or shrink over time. Faster, simpler installation. A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal.

  • Color: Silver
  • Brand: attwood
  • ASIN: B002FP86CW
  • UPC: 022697665508

attwood 66547-3 Stainless Steel Straight Thru-Hull Valve Fitting, Barbed, Standard Length, for 3/4-Inch Interior Diameter Hose

attwood 66547-3 Stainless Steel Straight Thru-Hull Valve Fitting,

This Attwood Stainless Steel Straight Thru-Hull Valve Fitting installs securely and provides long-term corrosion-free performance. This is a barbed, standard-length fitting for use with 3/4-inch interior diameter hose. This fitting has a 1 7/8-inch flange diameter, a 1-inch thread outside diameter, and 2-inch thread length. The barb is 1 ¼-inches long, and the fitting’s total length is 3 3/4-inches. The installation hole saw size is 1 1/8-inches, there is a 3/4-inch NPSM thread, and the maximum hull thickness is 1 5/8-inch. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

  • Color: Unspecified
  • Brand: attwood
  • ASIN: B000UAXSKY
  • UPC: 022697665478

Five Oceans White Straight Thru-Hull Connection for Hose, 1/2" FO-1866

Five Oceans White Straight Thru-Hull Connection for Hose,

This Five Oceans Thru-hulls for hose gives the look of stainless steel without the cost. Nylon plumbing fittings like these cost less than similar fittings made of Marelon or Bronze. Uses include scupper, sink drain, and bilge pump overboard discharge. Not recommended for use below the waterline.SPECIFICATIONS:Hose Size: 1/2"Mounting Hole Diameter: 49/64"Material: Nylon Head: FlatColor: WhiteType: Thru-Hull Fittings PRODUCT NUMBER: FO-1866

  • Color: white
  • Brand: Five Oceans
  • ASIN: B00GGX7H2E
  • UPC: 082045286304

Aramox Boat Hose Thru Fitting,Stainless Steel Thru-Hull Fitting Hose Barb Marine Barbed Hose Thru Drain

Aramox Boat Hose Thru Fitting,Stainless Steel Thru-Hull Fitting

Specification: Condition: 100% Brand new Size: 3/4 " Color : Silver  Material: 316 Stainless steel Application: Boats / Yachts / Cars / Trailer Package List: 1 * Boat Threaded Fitting Notice: Please allow 1slight error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures.

  • Color: popular
  • Brand: Aramox
  • ASIN: B07P66SMVB
  • UPC: 724942183071

SeaLux Marine 316 Stainless Steel Trim Cover 90 Degrees Elbow Bilge Pump Thru-Hull/Scupper Drain for Hose dia. 3/4", Flange dia. 1-7/8"

SeaLux Marine 316 Stainless Steel Trim Cover 90

SL887804351 SeaLux Marine 90 degree L-Shape Thru Hull/ Scupper With 316 Stainless Steel Trim Cover, Molded from polypropylene with fiber glass for strength. Not recommended for use below the waterline. Hose: 3/4" ; Flange : 1-7/8" ; Max Hull Thickness: 1-3/8" Cut Hole for installation: 1-3/8" More dimension available on product picture.

  • Brand: SeaLux Marine Products
  • ASIN: B01KQ0ZX00
  • UPC: 813969022958

SEACHOICE Thru-Hull Connector, 3/4" Hose, Black, Plastic

SEACHOICE Thru-Hull Connector, 3/4" Hose, Black,

Molded plastic with broad flange. Per ABYC ìSafety Standards for Small Craft". Not recommended for use below the waterline.

  • Brand: SEACHOICE
  • ASIN: B0006ZCFF2
  • UPC: 719249181516

Amarine-made Marine 316 Stainless Steel Trim Cover 90 Degrees L Shape Bilge Pump Thru-Hull/Scupper Drain for Hose Dia. 1", Flange Dia. 2-3/8"-2264S

Amarine-made Marine 316 Stainless Steel Trim Cover 90

Marine 90 degree L-Shape Thru Hull/ Scupper With 316 Stainless Steel Trim Cover, Molded from polypropylene with fiber glass for strength. Not recommended for use below the waterline. Hose:1" Flange: 2-3/8" More dimension available on product picture

  • Brand: Amarine-made
  • ASIN: B0797RYPMC
  • UPC: 615200849924

Attwood 66543-3 Stainless Steel Barbed Short Straight Thru-Hull, 1 1/8-Inch

Attwood 66543-3 Stainless Steel Barbed Short Straight Thru-Hull,

Polish your image with these beautiful, durable stainless steel fittings. Each Thru-Hull and Scupper Valve is available with a new silicone gasket and are backed by Attwood's trusted Lifetime Warranty! Why specify plastic parts when these fittings will last the life of the boat? Cast from certified enhanced #316 Stainless Steel allow for strength and lifetime corrosion-resistance. We polish all visible areas to a mirror finish, then each part through a passivation for additional protection. Thick steel sidewalls withstand continual stress and hose flexing. A channel under the flange holds a bead of sealant, making it easier to install and apply a trouble free seal. All models have wrench flats or an end notch to hold as a gripping surface. One installer can tighten all connections from inside the hull. Barbed tail ends provide plenty of room to hold multiple clamps.

  • Brand: attwood
  • ASIN: B002FP85OQ
  • UPC: 022697665430

Seachoice 18131 90-Degree Angled Thru-Hull Connector, White Finish, 0.75 Inches

Seachoice 18131 90-Degree Angled Thru-Hull Connector, White Finish,

Providing anglers with a reliable connection above the waterline, this high impact plastic thru-hull connector is critical to safe and dependable operation of onboard plumbing systems. Designed for use with one back nut, unlike old style 90 degree thru-hull fittings with both front and back nut. Sea choice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Sea choice is run for and by boaters offering a wide-ranging product line while remaining affordable.

  • Color: Unspecified
  • Brand: SEACHOICE
  • ASIN: B0006ZCFDY
  • UPC: 719249181318

Mtsooning 1pc Boat Thru Hull Fitting Marine Hose Barb Connector Stainless Steel 3/4"

Mtsooning 1pc Boat Thru Hull Fitting Marine Hose

Package List: 1 Pc Boat Thru Hull Fitting Note: Please allow 1-3mm/0.04"-0.12" error due to manual measurement. Due to the different monitors and different light,the picture may not reflect the actual color of the item. Thanks for your understanding.

  • Color: silver
  • Brand: Mtsooning
  • ASIN: B07D9H31P1
  • UPC: 682698822159

Seaflo Thru Hull Fittings (3/4)

Seaflo Thru Hull Fittings

DescriptionSEAFLO manufactures a variety of thru-hulls for your specific application. Our Thru-Hulls are meant for installation through the transom and are ideal for overflow use in livewell installations or as an exhaust port for a bilge pump. These thru-hulls are available in a variety of sizes ranging from 5/8″ up to 1-1/2″. Their construction is designed to resist degradation as a result of chemical and saltwater exposure.DetailsMolded white plastic with broad flangePer ABYC "Safety Standards for Small Crafts"NOT RECOMMENDED FOR USE BELOW THE WATERLINESturdy construction for long lifespanEasy to install and removeSimple to use

  • Color: White
  • Brand: Seaflo
  • ASIN: B076VTKQQ3
  • UPC: 647336948141

attwood 3877-3 Polypropylene 90-Degree Thru-Hull Connector, White Finish

attwood 3877-3 Polypropylene 90-Degree Thru-Hull Connector, White

Providing anglers with reliable connections above the waterline, Attwood polypropylene thru-hull connectors are critical to the safe and dependable operation of onboard plumbing systems. This 90 degree thru-hull fitting is ideal for tight installations and prevents Hose kinking. Thermoplastic construction is highly durable and eliminates the potential for rust or electrolysis. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.

  • Brand: attwood
  • ASIN: B0000AZ5VK
  • UPC: 022697387738

Perko 1-1/8" Thru-Hull Fitting f/ Hose Plastic

Perko 1-1/8" Thru-Hull Fitting f/ Hose

Perko's Molded white polymer thru hull fitting for use with hose. Narrow flange. Not recommended for use below the waterline. Hose size: 1-1/8" / Mounting Hole Diameter: 1-5/16" / Max Hull Thickness: 1-1/2" / Flange OD: 2-1/4". Built with quality materials for long lasting durability.

  • Color: White
  • Brand: Perko
  • ASIN: B00027GNNY
  • UPC: 727114927152

White Water Marine Stainless Barbed Straight Thru-Hull (6550S-L2 - 5/8" Hose)

White Water Marine Stainless Barbed Straight Thru-Hull (6550S-L2

316 Stainless Steel Cast White Water Straight Thru-Hull Fitting. Sold by Each. White Water Marine Stainless Barbed Straight Thru-Hulls.

  • Brand: White Water
  • ASIN: B075JNQ1N7
Similar Thru Hull Hose Results