Edelbrock 7110 INTAKE MANIFOLD

Edelbrock 7110 INTAKE

The Edelbrock Street Tunnel Ram Intake Manifold is designed for operating below 7, 500 RPM where low-end torque is not a prime factor. Engine breathing is enhanced if the intake manifold is configured to optimize the pressure pulses in the intake system. It is great for engines with slightly modified heads. They are applicable to all street machines, street rods, pro-street cars and marine applications. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding horsepower from 3, 500 RPM up to 7, 500. The top has a vacuum outlet for power brakes. Carburetor center to carburetor center is 8. 875.

  • Brand: Edelbrock
  • ASIN: B000CNAT42
  • UPC: 085347071104

Polished Gasser Style Competition Air Scoop-Blown/Tunnel Ram Engine

Polished Gasser Style Competition Air Scoop-Blown/Tunnel Ram

This Hilborn-style scoop is just the finishing touch for that blown or tunnel ram engine. This air cleaner scoop is designed to be used with two 4 barrel dual quad carbs with a 5-1/8" neck, but it can be used on single 4 barrel applications if the scoop will be above the distributor and is centered over the carb. Available in: Plain - raw, unfinished casting Black - wrinkle coated PolishedApproximate measurements are 20" long, 9-1/2" wide and 6" tall. Includes air filters, mounting plates and hardware. 925-11900 Instructions (PDF) Note: Carb center spacing can be no wider than 9-1/4".

  • Color: Polished
  • Brand: Speedway Motors
  • ASIN: B01MZE1T6E

Weiand 1994WND Hi-Ram Tunnel Ram Intake Manifold

Weiand 1994WND Hi-Ram Tunnel Ram Intake

Hi-Ram Tunnel Ram Intake Manifold351 Cleveland V8 4V Head3200-9000 rpm 2 x 4 carburetor topSquare flange carburetor mountingSpecial D-shaped port runner designLarge volume plenumPower band: 3200-9000 RPMHeight: Front 8.81", Rear 9.18"Port Size: 2.36" height 1.63" widthCarb Flange Center-To Center 8-3/4"

  • Brand: Weiand
  • ASIN: B07MGK7PSH
  • UPC: 099998572255

Edelbrock 29135 SBC Super Victor Manifold - Vortec 262-40

Edelbrock 29135 SBC Super Victor Manifold - Vortec

The number 2925 is a high performance feature packed small-block racing manifold for standard port location 23-degree cylinder heads. A taller profile with extra long runners that extend into the plenum offers increased volume.

  • Brand: Edelbrock
  • ASIN: B000VU2TE4
  • UPC: 085347291359

Weiand 8984 Hi-Ram Intake Manifold Gasket

Weiand 8984 Hi-Ram Intake Manifold

Weiand Intake Manifold Gaskets are designed to improve efficiency and increases durability. These gaskets prevent leakage between two objects under compression. They allow less precise mating surface and fills irregularities.

  • Brand: Weiand
  • ASIN: B000CQBEIY
  • UPC: 032474898401

Lokar KD-2727HT Hi-Tech Kickdown Kit for Chrysler 727 Transmission

Lokar KD-2727HT Hi-Tech Kickdown Kit for Chrysler 727

Lokar Hi-Tech Kickdown Kit for Chrysler 727 Transmission is designed with a specially extruded liner for extended life of the cable, not to be confused with ordinary brake hose. The kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. The kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. The kickdown can be mounted with Lokar's stainless steel carburetor bracket and return springs (which are sold separately). All units are available in black housing upon special request. It has complete instructions which are included in the kit.

  • Brand: Lokar
  • ASIN: B000COL2TC
  • UPC: 815470006175

Holley 0-8007 Model 4160 390 CFM Square Bore 4-Barrel Vacuum Secondary Electric Choke New Carburetor

Holley 0-8007 Model 4160 390 CFM Square Bore

This carburetor provides maximum performance on street and mild race vehicles and is a universal 4-barrel carburetor. It should not be used with adaptors on spread bore type intake manifolds. It is 100-percent wet-flow tested and calibrated for street drivability and includes an electric choke with 2 x 4 street tunnel rams.

  • Brand: Holley
  • ASIN: B00029J4HE
  • UPC: 090127001486

Lokar KD-20C6HT Hi-Tech Kickdown Kit for Ford C-6 Transmission

Lokar KD-20C6HT Hi-Tech Kickdown Kit for Ford C-6

Lokar Hi-Tech Kickdown Kit for ford C-6 Transmission is designed with a specially extruded liner for extended life of the cable, not to be confused with ordinary brake hose. The kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. The kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. The kickdown can be mounted with Lokar's stainless steel carburetor bracket and return springs (which are sold separately). All units are available in black housing upon special request. It has complete instructions which are included in the kit.

  • Brand: Lokar
  • ASIN: B000CCFZWE
  • UPC: 815470006489

Edelbrock 8026 WATER NECK ADAPTER

Edelbrock 8026 WATER NECK

Designed and calibrated for small cubic-inch engines such as 305 c. i. d and smaller Chevrolet; 302 c. i. d. and smaller Ford and dual-quad applications such as our new RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram. For single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1801/#1802 are calibrated for single-quad applications and factory equipped with: Metering Jets - Primary . 086, Secondary . 095, Primary Rod . 065 x . 052, orange spring (5" Hg). #1803/#1804 is calibrated for dual-quad applications and factory equipped with: Metering Jets - Primary . 086, Secondary . 077; Metering Rods - . 065 x . 057; #1804 includes Primary . 086, Secondary . 077; Metering Rods - . 065 x . 052; Step-Up Spring - orange (5" Hg). Use Carb Studs #8008 or #8024 if needed.

  • Brand: Edelbrock
  • ASIN: B00K9ZXFAI
  • UPC: 085347080267

Edelbrock 7071 THROTTLE LINKAGE KIT

Edelbrock 7071 THROTTLE LINKAGE

The Edelbrock Throttle Linkage Kit is designed for dual carburetor equipped street tunnel ram manifolds. It works with sideways mounted carburetors in vehicles operating below 7, 500 RPM where low-end torque is not a prime factor. The distance from carburetor center to carburetor center should be 8. 88 and the manifold top with bottom height should be 9. 25. It does not fit raised port cylinder heads.

  • Brand: Edelbrock
  • ASIN: B000CN707G
  • UPC: 085347070718

Lokar KD-2AODU Black Kickdown Cable Kit for Ford AOD Transmission

Lokar KD-2AODU Black Kickdown Cable Kit for Ford

Lokar Black Kickdown Cable Kit for ford AOD Transmission is designed with a specially extruded liner for extended life of the cable, not to be confused with ordinary brake hose. The kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. The kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. The kickdown can be mounted with Lokar's stainless steel carburetor bracket and return springs (which are sold separately). All units are available in black housing upon special request. It has complete instructions which are included in the kit.

  • Brand: Lokar
  • ASIN: B004BSSJAU
  • UPC: 815470006090

Lokar KD-20C4HT Hi-Tech Kickdown Kit for Ford C-4 Transmission

Lokar KD-20C4HT Hi-Tech Kickdown Kit for Ford C-4

Lokar Hi-Tech Kickdown Kit for ford C-4 Transmission is designed with a specially extruded liner for extended life of the cable, not to be confused with ordinary brake hose. The kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. The kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. The kickdown can be mounted with Lokar's stainless steel carburetor bracket and return springs (which are sold separately). All units are available in black housing upon special request. It has complete instructions which are included in the kit.

  • Brand: Lokar
  • ASIN: B000CCFIVM
  • UPC: 815470006526

Edelbrock 75213 INTAKE MANIFOLD

Edelbrock 75213 INTAKE

Utilizing the proven short runner tunnel-ram style, both of these manifolds provide the next step up in performance for LT1 and LT4 owners. These are both direct stock replacements for OEM equipment with all required emissions features.

  • Brand: Edelbrock
  • ASIN: B001ELW9UI
  • UPC: 085347752133

Lokar KD-2700HT Hi-Tech Kickdown Kit for GM 700-R4 Transmission

Lokar KD-2700HT Hi-Tech Kickdown Kit for GM 700-R4

Lokar Hi-Tech Kickdown Kit for GM 700-R4 Transmission is designed with a specially extruded liner for extended life of the cable, not to be confused with ordinary brake hose. The kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. The kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. The kickdown can be mounted with Lokar's stainless steel carburetor bracket and return springs (which are sold separately). All units are available in black housing upon special request. It has complete instructions which are included in the kit.

  • Brand: Lokar
  • ASIN: B000COMNLI
  • UPC: 815470006229

Lokar KD-2904HT Hi-Tech Kickdown Kit for Chrysler 904 Transmission

Lokar KD-2904HT Hi-Tech Kickdown Kit for Chrysler 904

Lokar Hi-Tech Kickdown Kit for Chrysler 904 Transmission is designed with a specially extruded liner for extended life of the cable, not to be confused with ordinary brake hose. The kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. The kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. The kickdown can be mounted with Lokar's stainless steel carburetor bracket and return springs (which are sold separately). All units are available in black housing upon special request. It has complete instructions which are included in the kit.

  • Brand: Lokar
  • ASIN: B000COL2TM
  • UPC: 815470006144
Similar Tunnel Ram Manifold Results