Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment

Malco TS1 Turbo Shear 20 Gauge Capacity Sheet

  • Color: NA
  • Brand: Malco
  • ASIN: B0000AQK7C
  • UPC: 686046530208

DEWALT DWASHRIR Impact Ready Shears Attachment

DEWALT DWASHRIR Impact Ready Shears

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

  • Brand: DEWALT
  • ASIN: B01BSAWORC
  • UPC: 885911413749

Malco TSCM Corrugated Metal Turbo Shear

Malco TSCM Corrugated Metal Turbo

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSCM makes fast cross-cuts, lengthwise trim cuts, and circular or square outlet holes, in large or small corrugated patterns and other non-standing-seam panels including trapezoidal (box) profiles. Elongated offset blades with compact jaws allow the drill handle or battery pack to clear the roofing panel surface as the TSCM head follows the rising angle of corrugations and other angled profiles. A sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp allows maximum portability and ease to go wherever the work is. The shear can operate at high or low speeds for the control you need to follow a precise cut line. Hardened carbon steel blades combine to offer long service life in 30 to 24-gauge (0.31 - 0.61 mm) roofing panel metal. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Replacement blades TSCMRB

  • Color: N/A
  • Brand: Malco
  • ASIN: B00IMJDNKK
  • UPC: 686046542317

Malco TSF2 TurboShear Fiber Cement Backer Board Shear

Malco TSF2 TurboShear Fiber Cement Backer Board

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSF2 makes cuts in 1/2" (13 mm) backer board and will also cut 5/16” fiber cement siding. Use this to make straight minimum dust cuts and arcs with the capability to navigate curves for window and door arcs! The blades are made of treated high carbon steel and feature a reversible skid plate to assure long service life. Replacement blade and skid plate TSF2RB

  • Color: NA
  • Brand: Malco
  • ASIN: B0014E9WN2
  • UPC: 686046530956

Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear

Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment

Turboshear metal cutting attachment Shear, heavy duty, suitable for use with: 14.4 V 3/8 in cordless or corded drill, 16 mild/18 GA cutting capacity, steel, galvanized, for ferrous and non-ferrous sheet metal, metal roofing, vinyl, steel mesh, ductwork and furnace jackets.

  • Brand: Malco
  • ASIN: B0002894R0
  • UPC: 796084322311

Malco TSMD Double-Cut TurboShear Drill Attachment

Malco TSMD Double-Cut TurboShear Drill

Highlights: make your drill a double-cut metal Shear now you can get double-cut performance in a versatile Malco Turboshear fits the corded or cordless drill You already own a compact telescoping clamp accommodates both length and width of any size motor housing, including smaller impact drivers, to ensure easy one-hand operationoptional Spacers are stored on clamp for large motor housings The clamp collar allows the shear head to be rotated 360 degree and set in any position for optimum tool clearance These blades can approach a cut from either end to produce a quality work-piece edge they can also navigate up to 90 degree outside profiles of metal roofing panels, or metal ductwork, and are beefy enough to cut through seams you can easily disengage the blades from the cutting path or quickly re-engage to continue cutting The long lasting carbon steel blades are also easily replaced on the job

  • Brand: Malco
  • ASIN: B016S1HRJQ
  • UPC: 686046546636

Malco TSHDRB Replacement Blade for Malco for TSHD Heavy Duty Sheet Metal Turbo Shear

Malco TSHDRB Replacement Blade for Malco for TSHD

Replacement blades for Malco TurboShear HD (Item# 199610).

  • Brand: Malco
  • ASIN: B0002894UM
  • UPC: 686046530611

Malco TSF1 Turboshear Fiber Cement Siding Shear

Malco TSF1 Turboshear Fiber Cement Siding

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. Fast cutting blades are specialized for fiber cement siding only. The blades design minimizes dust. Wide skid plate design stabilizes for a precise clean cut (including window and door arches) in fiber cement siding up to 5/16” (8mm). Replacement blade TSF1RB.

  • Color: NA
  • Brand: Malco
  • ASIN: B0014EBQP4
  • UPC: 686045533941

Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo Shear Drill Attachment

Malco TSHD1 Automotive Heavy Duty 18 Gauge Turbo

The Turbo shear Model TSHD1 attaches to a minimum 14.4-Volt cordless or maximum 7-Amp A/C electric drill. The driveshaft of the TSHD1 inserts directly into a 3/8-in (10 mm) or 1/2-in (12.7 mm) chuck. The cam end of the driveshaft operates an upper blade to create a smooth scissors cutting action in most common sheet metals. A telescoping drill clamp adjusts to fit length and width of any drill housing for one-hand operation. The compact, molded clamp even fits smaller lithium-ion battery powered drills. Heavy-duty gearing combines with high carbon steel blades to cut up to 18-ga (1.22 mm) automotive steel. Minimal force is required to move through a cut. The Turbo Shear Model TSHD1A1 can follow a straight line or tight left curved or square patterns. A wide jaw opening navigates cuts in auto body panels and profiles including layered metal, rocker panels and plastic bumpers. The sleek, lightweight, aluminum cast shear head and form-fitting drill clamp ensure balanced, easy control. Lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Service life of the blades is rated at 2500-ft (762 mm) minimum in 24-ga (0.61 mm) mild steel. The long-wearing blades are replaceable and easily installed on t...

  • Brand: Malco
  • ASIN: B004AHC19M
  • UPC: 686046536699

Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear

Genesis GES40 4.0 Amp Corded Swivel Head Variable

The Genesis GES40 swivel head electric metal sheer tool cuts through various metals with ease with a 4.0 amp motor. - 4.0 Amp Motor-360° Swivel Head for cutting curves in sheet metal-Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge-Three blades work to reduce metal deformation-Cut 14 Gauge aluminum, 20 gauge stainless steel, or 18 gauge Steel Genesis' two year warranty means you buy with confidence.

  • Brand: Genesis
  • ASIN: B01LZ7HCRC
  • UPC: 811285020665
Similar Turbo Shear Results