TapRite Separate Pressure Adjusting 2 Product CO2 Regulator

TapRite Separate Pressure Adjusting 2 Product CO2

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. Tap two kegs at the same time and control the pressure to each of them individually. This two product two pressure CO2 regulator has two separate gauges to uniquely measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge tells you the amount of CO2 left in your tank. Regulator attaches directly to CO2 tank and has an air shut off switch for each CO2 line. Nonadjustable shut down blows off at 55-65 PSI. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: Tap two kegs at the same time and control the pressure to each. 0-60 Gauges measure pressure to each keg. 0-2000 Gauge measures CO2 in tank. Has air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-fille...

  • Color: Black
  • Brand: Taprite
  • ASIN: B002QAP6JC
  • UPC: 845033087556

Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator

Taprite T752HP Two Product Dual Pressure Kegerator CO2

The TAPRITE ADVANTAGE Taprite regulators are built and tested in accordance with UL Standard 252 for compressed gas Regulators and UL 252A for compressed gas regulator accessories All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E High CO volumetric flow provides continuity in product dispensing Polycarbonate bonnet will not chip, break, or fade 10 Micron Filter built in to keep contaminants out of regulator One repair kit for primary and secondary regulators. WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING.

  • Color: Brass Red Black
  • Brand: Taprite
  • ASIN: B0060NOX40
  • UPC: 608938598721

Dual System 2 Stage CO2 Pressure Regulator For Draft Beer Regulators and Kombucha Set Ups. Connect 2 Systems to 1 Tank. CGA-320 Connection

Dual System 2 Stage CO2 Pressure Regulator For

TerraBloom 2 Stage CO2 Regulator is specifically designed for simultaneous use with 2 draft beer/kombucha setups (kegs or fermentation tanks). This CO2 regulator is equipped with 3 gauge displays: 1 for showing the working pressure in your 1st keg or fermentation tank, 1 for showing working pressure in your 2nd keg or fermentation tank, as well as 1 for showing the pressure in your CO2 tank. This regulator attaches to standard North American CO2 gas tanks with a male thread (standard CGA-320 connection). Red knobs on the regulator lets you adjust the working pressure without any additional tools in each individual kegs/fermentation tanks.

  • Color: Metal
  • Brand: TerraBloom
  • ASIN: B07D8J7NDC
  • UPC: 858355007386

Co2 Beer Regulator Two Product Dual Pressure Kegerator Heavy Duty Features T-Style Adjusting Handle - 0 to 60 PSI-0 to 2000 Tank Pressure CGA-320 Inlet w/ 3/8" O.D. Safety Discharge 50-55 PSI

Co2 Beer Regulator Two Product Dual Pressure Kegerator

Beer Draft Regulator Supreme! Introducing Pro Co2 Beer regulator. The heavy duty double gauge and professional grade tool that will always tell you working pressure and tank pressure with pinpoint accuracy! Feature T - Style Adjusting handle : makes it easy to adjust the pressure inside the Keg. Dual Body Regulator for maximum control of how much pressure goes in and out of the keg Smart Barbed output for easily connecting/ switching between kegs and tanks Shut-off valve with built-in check valve for beer back-up prevention This regulator allows you to tap two kegs at the same time and control the pressure to each keg Heavy duty construction ; Heavy duty dual gauges Individual shut-off valves allow you to switch on/off each CO2 line Big body for less pressure fluctuation Inlet Nut : CGA320 High Pressure Gauge : 0 - 2000 PSI Low Pressure Guage : 0 - 60 PSI / 4 Bar (output pressure) Outlet barb sized for use with 5/16" ID gas hose / O.D. 3/8" Regulator has a pressure safety system with blow off at 50 to 55 PSI Equipped with all the specs a business owner could ever ask, this tool will become your dependable, go-to pressure monitoring solution that will offer you the peace of mind you need. Guarantee HIGH QUALITY! >> Hurry! Scroll Up & Click the yellow "...

  • Color: Red, Black, Gold
  • Brand: Manatee
  • ASIN: B07J9K7LJD
  • UPC: 634304877749

Kegco LHU5DB Elite Series Dual Body CO2 Draft Beer Regulator

Kegco LHU5DB Elite Series Dual Body CO2 Draft

Kegco's LHU5DB Elite Series Dual Body CO2 Draft Beer Regulator has a bold design with elite functionality. Designed for applications where two kegs of beer will be dispensed at two different pressures, it boasts three gauges that display both the CO2 pressure in each of the kegs and the volume of CO2 gas remaining in the cylinder, so you won't be caught off guard by an empty gas tank in the middle of a party. This regulator has a dual body design that features two 5/16" barbs and two large adjustment knobs that are easy to grip and turn for precise pressure placement. For added safety, it also has manual pressure release valves and internal pressure relief valves that release pressure at 55-65 PSI. A sintered metal filter has been built into the stem to keep harmful contaminants out of the regulator, so you'll be using it to enjoy beer after beer for years to come.

  • Color: Chrome
  • Brand: Kegco
  • ASIN: B07DYNB9YD
  • UPC: 700697206982

Kegco LHU52-2 Elite Series Dual Gauge CO2 Draft Beer Regulator, 2 Product

Kegco LHU52-2 Elite Series Dual Gauge CO2 Draft

Kegco's LHU52-2 Elite Series Dual Gauge CO2 Draft Beer Regulator has a bold design with elite functionality. Designed for applications where two kegs of beer will be dispensed at the same pressure, it boasts a double gauge design that displays both the CO2 pressure inside of the kegs and the volume of CO2 gas remaining in the cylinder, so you'll never be surprised by an empty gas tank in the middle of a party. This regulator features a splitter with two 5/16" barbs and a large adjustment knob that is easy to grip and turn for precise pressure placement. For added safety, it also has a manual pressure release valve and an internal pressure relief valve that releases pressure at 55-65 PSI. A sintered metal filter has been built into the stem to keep harmful contaminants out of the regulator, ensuring reliable high-quality performance for every keg of beer.

  • Color: Chrome
  • Brand: Kegco
  • ASIN: B07DYMDNPT
  • UPC: 700697206975

Kegco KC LH-542-2 Dual Product Premium Pro Series Dual Gauge Co2 Beer Regulator, Chrome

Kegco KC LH-542-2 Dual Product Premium Pro Series

This Pro Series dual-output double gauge regulator is loaded with high end features! If you plan on dispensing two separate kegs but do not need to have independent keg pressures, then this regulator will work for you. This regulator has a Y splitter with two independent shut off valves, so you can still run a single keg if you want to. The Pressure Adjustment Knob can be turned by hand so it does not require tools. It also features a pressure release valve so you can release pressure from the system at the regulator. This is great a great feature if you have a keg coupler that does not include a pressure release valve.

  • Color: Chrome
  • Brand: Kegco
  • ASIN: B003WWLKUC
  • UPC: 797734448542

Keg Regulator CO2, MRbrew Kegerator Regulator CGA-320, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure, Beer Regulator, Co2 Pressure Regulator with Safety Pressure Relief Valve

Keg Regulator CO2, MRbrew Kegerator Regulator CGA-320, 0-60

MRbrew Double Gauge CO2 Regulator, which has been specially designed to provide maximum convenience and durability in busy commercial environments like bars, tasting rooms, and restaurants. ★The MRbrew Beer Keg Regulator works with any Co2 Tank with a CGA-320 valve.★Both gauges feature an easy to read design.★The top gauge lets you know how much Co2 Pressure is in the keg and displays 0-60 psi. ★The second gauge lets you know how much Co2 gas is left inside the Co2 Tank and features a 0-3000 display. So you'll never be caught off guard by an empty CO2 tank again.This brewery-grade beer regulator features a multi-stage body for more precise control when making small adjustments to the output pressure.The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the kegAllowing adjustments to be optimized for the operational range of beer, wine, coffee or whatever you're dispensing. A large adjustment knob allows you to make quick and accurate adjustments by hand and turns effortlessly, even in freezing temperatures.The regulator body is constructed of forged brass with all brass connections and components, a sintered brass inlet filter, integrated nylon tank connection washer (and spa...

  • Color: Beer Regulator CGA320
  • Brand: MRbrew
  • ASIN: B07JWCSY9H

YaeBrew Two Product Dual Pressure Beer Kegerator CO2 Regulator - 0 to 60 PSI-0 to 3000 Tank Pressure CGA-320 Inlet w/ 5/16" ID Gas Hose 3/8" O.D. Safety Discharge 50-55 PSI

YaeBrew Two Product Dual Pressure Beer Kegerator CO2

2 regulators in one! Dual product Co2 regulator allows you to control the exact pressure to each keg, since many kegs require different serving pressures. This convenient setup allows the maximum flexibility and control in any draft installation with more than one tap. - Our regulators feature a convenient knob style pressure dial that can be adjusted without tools. With dual gauges you have one that shows the remaining pressure in the tank, and one that shows the pressure going to your keg. Connection to tank is sealed with ultra durable delrin gasket. When connecting off of each regulator you can connect each regulator to its own keg or tee off for multiple kegs from each regulator body. Dual Regulator Control Bodies allow for two different pressure settings off of one tank Large adjustment knobs , adjust pressure by hand (no tool required!). 5/16" Barb outlets valve with built in check valves permanent seal at the inlet nipple provides enhanced protection of leaks, eliminates the need for fiber washers upon refill. one gauge shows tank pressure Gauge marked for low air, so you can refill before your tank is empty! Inlet Nut : CGA320 High Pressure Gauge : 0 - 2000 PSI Low Pressure Guage : 0 - 60 PSI / 4 Bar (output pressure) Outlet barb sized for use with 5/...

  • Color: Two Product B
  • Brand: YaeBrew
  • ASIN: B075FTL4BL
  • UPC: 602989767822

Kegco 762-2 - Commercial Grade Double Gauge Two Product Regulator

Kegco 762-2 - Commercial Grade Double Gauge Two

The Kegco 762-2 double gauge two product commercial grade regulator ensures peak performance every time, even in demanding commercial environments like bars and restaurants. Durably constructed for a consistent flow pour after pour, it features a T-Style adjustment valve that makes it easier than ever to adjust the pressure in your kegs. This two product regulator includes a y splitter for applications where two kegs will be dispensed at the same keg pressure, and has two independent shut-off valves. A gauge on the top of the regulator indicates how much CO2 pressure is inside of the keg while a gauge on the side indicates the volume of CO2 gas remaining in the tank. A pressure release valve is conveniently located on the regulator body.

  • Color: Chrome
  • Brand: Kegco
  • ASIN: B010TSBGVY
  • UPC: 700697200218

YaeBrew Dual Product Premium Pro Series Dual Gauge Co2 Beer Regulator, Chrome, Home Brewing Two Product Keg Kegerator CO2 Regulator -Y Style

YaeBrew Dual Product Premium Pro Series Dual Gauge

- This Pro Series dual-output double gauge regulator is loaded with high end features! - If you plan on dispensing two separate kegs but do not need to have independent keg pressures, then this regulator will work for you. - This regulator has a Y splitter with two independent shut off valves, so you can still run a single keg if you want to. - The Pressure Adjustment Knob can be turned by hand so it does not require tools. - It also features a pressure release valve so you can release pressure from the system at the regulator. - This is a great feature if you have a keg coupler that does not include a pressure release valve.

  • Color: Y Style
  • Brand: YaeBrew
  • ASIN: B07G24G5XC
  • UPC: 615200826697

Kegco LH-54S-2 Pro Series Two Product Secondary Regulator, Chrome

Kegco LH-54S-2 Pro Series Two Product Secondary Regulator,

The Kegco LH-54S-2 Pro Series Two Product Secondary Regulator is built with high end features. Secondary regulators are used when you are attempting to dispense two or more kegs off of the same Co2 tank at different pressures. A secondary regulator will allow you to lower the pressure to each keg individually. You still need a primary regulator that then connects to the secondary with a piece of air line. Each secondary regulator has its own shut off valve and pressure adjustment knob, allowing you to set two different pressures on two different kegs and release the pressure from any one of the kegs. Secondary regulators are best mounted to a wall or the inside of the refrigerator.

  • Color: Chrome
  • Brand: Kegco
  • ASIN: B00MFZ1DT0
  • UPC: 793842261035

KegWorks TOF Premium Two Product CO2 Draft Beer Regulator

KegWorks TOF Premium Two Product CO2 Draft Beer

This dual product, dual gauge CO2 tank regulator ensures that your draft system is pouring out at the proper PSI for the perfectly carbonated beer. Its tank pressure gauge will keep you apprised of the remaining CO2 in each tank. This top-of-the-line CO2 regulator is unique to KegWorks in that it features a US or domestic output as a standard fitting with this component. Its dual product feature means you can attach two CO2 tanks and kegs to it and pour separate beers out at PSI levels tailored to the type of beer you're serving. It's great for commercial systems or for those who want to serve more than one beer from their home kegerator. This keg regulator is built for function and safety. It is UL-listed for passing safety product tests and includes a pressure relief valve to prevent against over-pressurization or tank rupture. To use, attach the regulator to your CO2 tank by the inlet nut. The air line then attaches from the outlet at the bottom to the keg coupler. Adjust the pressure with a flat head screwdriver, tighten the nut to lock, and open using the shut off valve by the outlet. This high-end CO2 pressure regulator makes it simple to pour out multiple beers at their correct PSI levels.

  • Color: Brass
  • Brand: KegWorks
  • ASIN: B07P7RDJ58
  • UPC: 845033077687

KegWorks T742-2 Two Product CO2 Regulator

KegWorks T742-2 Two Product CO2

Tap two kegs at the same time using one regulator and air tank. This unit includes our double gauge poly carbonate bonnet regulator with a "Y" fitting, two air shutoff valves. * the polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. * specs - material: Brass, keg psi: 0-60, tank psi: 0-2000, dimensions: 7"W x 7 1/2"H x 5"d, fittings: Brass gas tailpiece; tank connector: CGA 320, adjustment mechanism: polycarbonate bonnet, and shut off valves: Brass. * includes - includes double gauge regulator and air Y fitting with shut Offs.

  • Color: Multicolor
  • Brand: KegWorks
  • ASIN: B002OSHLMQ
  • UPC: 845033087754

Brewin Dual Body Secondary CO2 Draft Beer Dispensing Regulator

Brewin Dual Body Secondary CO2 Draft Beer Dispensing

This Brewin Dual Body Double Gauge Regulator is perfect for the home brewer or commercial restaurant who needs to dispense two different PSI's for multiple reasons such as dispensing beer and soda at the same time or for dispensing beer while at the same time having just enough pressure to pour house wines.

  • Color: Chrome
  • Brand: Brewin
  • ASIN: B071HK3GNF
  • UPC: 731236459187
Similar Two Product Co2 Regulator Results