Leviton 59A00-1 UPB Lamp Module, White

Leviton 59A00-1 UPB Lamp Module,

The HAI by Leviton UPB Lamp Module is a plug-in dimmer that incorporates UPB (universal powerline bus) two-way powerline communication technology, which gives it the ability to be remotely controlled by UPB compatible controllers. The Lamp Module has one UPB-controllable outlet that can sense the lamp’s local on/off switch to turn the lamp on, even after it was turned off using UPB control. The HAI by Leviton UPB Lamp Module is also capable of transmitting UPB messages (including current light level) when the local lamp switch is used to turn the lamp on. Each lamp module can be custom-configured to fit an individual’s lifestyle and desires. The HAI by Leviton Lamp Module is capable of storing up to 16 preset light levels and fade rates to create powerful lighting scenes. The HAI by Leviton Lamp Module is capable of being set to a non-dimming mode in order to control such loads as fluorescent lights.

  • Color: White
  • Brand: Leviton
  • ASIN: B004KO0R3W
  • UPC: 872257003697

PCS PulseWorx UPB Receptacle Module, White (RM1-15-W)

PCS PulseWorx UPB Receptacle Module, White

Plug any device into the PulseWorx UPB Receptacle Module to immediately enable UPB control. This module features one UPB-controlled outlet on top and one regular pass-through outlet on bottom. It can replace a traditional duplex receptacle using the existing wiring, making it easy to extend UPB control throughout your home or business. The PulseWorx UPB Receptacle Module enables UPB remote control for a plug-in load up to 120VAC with a maximum rating of 15 Amps. It's perfect for controlling lamps, fans, motors, pumps, and other non-dimming appliances. The UPB-controlled outlet can be included in up to 16 scenes and gives you three relay options (On, Off, or Blink) for each scene. These pre-set options are easily adjustable through the PulseWorx manual programming method. You also have the option of setting a "maximum on time" (up to 240 minutes) to automatically turn off a plugged in appliance after the set time. A multi-color LED (blue, magenta or red) near the bottom outlet indicates the module's status and provides an adjustable night light. Designed with safety in mind, the module is constructed from high-impact resistant thermoplastic and is tamper-resistant to protect children, automatically shuttering its receptacles when a plug is removed. This meets the National Electric...

  • Brand: Powerline Control Systems (PCS)
  • ASIN: B00V5AYOGA
  • UPC: 811976014263

UPB Appliance Module

UPB Appliance

What if you could turn on your fan from across the room? Simply Automated's UPB Appliance Module makes it possible it to control an appliance such as a coffeepot, fan or even fluorescent lighting using your existing outlets. Just plug the appliance into t

  • Brand: Simply Automated
  • ASIN: B00152ONBE
  • UPC: 895528001031

Simply Automated UPB Heavy Duty Lamp Module, 400W (UML-20-W)

Simply Automated UPB Heavy Duty Lamp Module, 400W

Turn your lights on and off remotely, dim them, and even create entire lighting scenes with this plug-in lamp module. The UPB Lamp Module can be controlled remotely using a UPB Wall Controller or a UPB Dimmer Switch (both sold separately). The UPB Lamp Module plugs into your wall, but you won't lose an outlet: The lamp to be controlled plugs into the bottom of the module, but a pass-through outlet is included as well, for a non-controlled appliance or lamp. The UML series are plug-in modules designed to dim 120VAC incandescent, halogen, LED lamps and low-voltage magnetic (and standard dimmabe electronic) transformers based on lighting scene-link commands received over the power line. 1 Watt minimum - 300 Watt maximum, configurable for on/off/dimming.

  • Brand: Simply Automated
  • ASIN: B00152ONDC
  • UPC: 895528001062

Leviton 36A00-1 UPB Powerline Interface Module with Cable

Leviton 36A00-1 UPB Powerline Interface Module with

HLC Powerline Interface Module with cable for Omni and Lumina controllers; A UPB Powerline Interface Module (PIM) will connect your lighting system to a UPB compatible home control system or to a computer, which can then control your UPB lights. It comes with a cable for connecting the PIM to a serial port on an HAI Lumina, Lumina Pro, Omni LTe, Omni II, Omni IIe, or OmniPro II home control system. The status light on the PIM will blink red when it transmits a UPB signal on the powerline and it will blink green when it receives a valid UPB signal on the powerline. The UPB PIM to computer cable is used to connect the PIM to a computer's standard DB- 9 serial port for use with HAI UPB UPStart configuration software. 110V.

  • Brand: Leviton
  • ASIN: B000CEP5LS
  • UPC: 080050401811

PCS PulseWorx UPB Powerline Interface Module (PIM), USB (PIM-U)

PCS PulseWorx UPB Powerline Interface Module (PIM), USB

The PulseWorx UPB Powerline Interface Module (PIM) is the perfect device for interfacing your PC or dedicated controller to the powerline. Using PCS's patented UPB 2-way powerline communications technology, the PIM can both transmit and receive UPB commands via simple serial message sets, giving the host software the ability to perform true 2-way powerline communication. A pass-through outlet allows plugging of devices that do not require remote control. TYPE: Standard USB port. 4800 baud, 8 bits, 1 stop bit, No parity. Dimensions: 1.7 x 4 x 1.2 inches.

  • Brand: Powerline Control Systems (PCS)
  • ASIN: B002C7NUPG
  • UPC: 811976010937

Simply Automated UPB Input/Output Module (UMI-32-W)

Simply Automated UPB Input/Output Module

You don t need to press a button or flip a switch in order to enjoy home automation. By installing the UPB Input Output Module, you ll be able to control such low power electrical devices as door strikes, drapery controls, garage door openers, or sprinkler valves when low voltage events are detected, including at the ringing of a telephone or doorbell or when door or window alarm switches are triggered. The UPB Input Output Module has three inputs and two outputs, so a single module can control several variations.

  • Brand: Simply Automated
  • ASIN: B000RRKU9M
  • UPC: 895528001055

PCS PulseWorx UPB Relay Fixture Module, 20A (FMR1-20)

PCS PulseWorx UPB Relay Fixture Module, 20A

The FMR-1 Fixture Module Relay is a single-channel wire-in home automation non-dimming relay load controller that transmits and receives UPB commands and status over the existing powerlines. It's the ideal solution for fluorescent lights, or other non-dimming loads (such as motors or transformers), that need to be individually controlled but are not currently wired to a dedicated wall switch location. Simply mount the FMR1 in any standard electrical box by snapping it into a 1/2-inch knockout. The module can either mount outside of the box or reside in the box. Use standard wire-nuts to connect the FMR1 to line and neutral and the loads. The high 20A rating of the Fixture Module Relay can control any conventional 20A residential circuit. The FMR1 will accept powerline commands from any UPB-compatible transmitter such as the PulseWorx Keypad Controllers, Timed Event Controller, Interface Modules, Approved Third-Party Controllers, Touch Screens, and WS1s. It can be a member of up to 16 Links/scenes with the capability to store a preset relay state of 0 or 100 percent. Each preset state can easily be adjusted by the homeowner using the innovative PulseWorx manual programming method. Each Fixture Module can be configured to transmit status changes and inform the rest of the network w...

  • Brand: PCS
  • ASIN: B0078898WI
  • UPC: 811976011637

PCS PulseWorx UPB Input Control Module - ICM

PCS PulseWorx UPB Input Control Module -

PCS Lighting ICM INPUT CONTROL MODULE,2/ WHITE PCS Lighting ICM INPUT CONTROL MODULE,2/ WHITE Also known as -Powerline Control System (Pcs) INPUT CNTRL MODULE 2CH, CNT WHT - P5-ICM

  • Color: white
  • Brand: PCS
  • ASIN: B00FCCIN5A
  • UPC: 811976001898

Simply Automated UCS-01 UPB Controller Scheduler-Timer

Simply Automated UCS-01 UPB Controller

Simply Automated's UPB Controller Scheduler-Timer (model UCS) allows you to control all UPB devices and scenes based on events or a set schedule. It is simple to operate and flexible, and is often used in place of more complex whole home automation schedulers because it is easier for most homeowners to program and adjust. Once the Scheduler-Timer has been setup, you can rely on timely lighting without worry. The Scheduler Timer automatically adjusts according to the nationally synchronized power grid, so it knows when daylight savings and leap years occur and even when the sun rises and sets for your location. Easy-to-navigate menus allow configuration without the use of a computer or UPStart software. However, the UCS can also serve as a computer interface module (CIM), allowing a PC with UPStart to connect to a UPB network. Tools Menu: Works like a pocket programmer. Add devices to a network. Change receive links. Monitor signal/noise levels logs noise, and more. Up to 99 events can be configured after initial setup, which includes setting the time, location (using zip code or latitude/longitude) and Network ID#. Each of the 99 available events can control a device or a scene based on time, sunrise (dawn), sunset (dusk) or a combination of a time from sunrise or sunset. The UCS...

  • Color: White
  • Brand: Simply Automated
  • ASIN: B00152RJS8
  • UPC: 895528001154

PCS PulseWorx UPB Dimmer Fixture Module, 400W (FMD2-4)

PCS PulseWorx UPB Dimmer Fixture Module, 400W

The FMD Fixture Module Dimmer is a two-channel wire-in home automation light dimmer that transmits and receives UPB commands and status over the existing powerlines. The FMD is the ideal solution to controlling incandescent lights or fixtures that need to be individually controlled or are not currently wired to a dedicated wall switch location. Each channel's preset on level may be programmed between 0 and 100 percent. Sixteen different fade rates can be selected - from instant-on to one hour - to give you ultimate flexibility in controlling how fast the lights fade on or off. The dimmer function can also be disabled, turning it into a switch, to allow the FMD to turn on and off non-dimmable loads such as fluorescent lights and motors. Simply mount the FMD on any standard electrical box by snapping it into a standard 1/2-inch knockout. The module can either mount outside of the box or it resides inside of the box. Use standard wire-nuts to connect the FMD2 to line and neutral and the loads. The FMD2 will accept powerline commands from any UPB-compatible transmitter such as the PulseWorx Keypad Controllers, Timed Event Controller, Interface Modules, Approved Third-Party Controllers, Touch Screens, and WS1s. Each channel of the FMD2 can be a member of up to 16 Links/Scenes with the...

  • Brand: Powerline Control Systems (PCS)
  • ASIN: B002C7RFM0
  • UPC: 811976011620

Simply Automated UPB Computer Interface Module, DB9 (UMC-DB9-W)

Simply Automated UPB Computer Interface Module, DB9

These plug-in modules enable computer-based configuration and control of household lighting, appliances and other devices over the powerline using digital UPB commands. UPB devices can be freely located anywhere in the home. No additional wiring is required and no radio frequency signals are used. Module UMC receives and transmits UPB digital commands and converts these signals to a serial RS-232C interface format. This UMC-DB9 model is ideal for controller applications, since it uses the highly reliable RS-232C serial interface -- common to most desktop PCs, home automation controllers and alarm panels. The UMC-DB9 can also be used to configure any UPB device.

  • Brand: Simply Automated
  • ASIN: B00152PYWQ
  • UPC: 895528001048

PCS PulseWorx UPB Powerline Interface Module IP (PIM-IP)

PCS PulseWorx UPB Powerline Interface Module IP

Control your UPB network via IP communication by installing the PulseWorx UPB Powerline Interface Module (PIM) IP. With a built-in web server as well as UPB Gen II technology, this Ethernet UPB powerline interface module allows you to program and send commands to UPB devices via a LAN network or over the internet. The PIM plugs into a standard power outlet and connects to your network via Cat5 cable. Because the module features Dual-Transmitter circuitry, UPB signals are boosted for long-distance transmission, allowing you to locate the PIM anywhere in your home. Once the PIM is setup, you can use UPStart Configuration Software or other IP-based device to remotely configure the UPB network. The PIM also allows standard port forwarding, so you can access the network from a smartphone, tablet, or other mobile web-enabled device. More Info for Developers: This PIM uses RS-232 commands via IP, allowing any device with a programmable serial port to send and receive UPB commands. The PIM operates at 4800 baud, and runs the ASCII-based command/report protocol. The PIM is both a UPB transmitter and a UPB receiver, giving you the ability to perform true two-way powerline communication. It also communicates in two different operating modes, depending on the level of information required fr...

  • Brand: Powerline Control Systems (PCS)
  • ASIN: B00K1H6IE4
  • UPC: 811976013785

Simply Automated UFR-30 Custom Series Fixture Relay Module

Simply Automated UFR-30 Custom Series Fixture Relay

WIRED-IN REMOTE CONTROL FOR APPLIANCES AND LIGHTING. Simply Automated's Relay Fixture Module (Models UFR) delivers ON/OFF and timed-off control for lighting, appliances, fans and pump/motors up to 12A. It is a wire-in device designed to remotely control lighting using Universal Powerline Bus (UPB) commands and scene-links received over the powerline. These modules are easily added to a powerline network and configured for ultra-reliable dimming and On/Off control with UPStart software. They can also be directly wired/controlled with a remote switch (model USR) and provide a flexible, low-cost alternative to hardwired or RF home automation strategies. These modules fit easily inside a standard electrical junction box and have snap-off mounting ears for tighter installs; they can also mount to other surfaces using screws/ties. Fixture modules connect directly to the existing household power wiring. The light-load connected to the module can be operated manually using a UPB wall switch or multi-button controller, or automatically via scheduler-timer, PC or home automation server. Manual scene-link modification: These capabilities are unique to Simply Automated devices. A user can easily change existing scenes, add or remove devices and adjust light levels, by pressing rocker/buttons...

  • Brand: Simply Automated
  • ASIN: B00152RJJM
  • UPC: 895528001024

PCS PulseWorx UPB Wire-In Split Phase Repeater (SPR-1)

PCS PulseWorx UPB Wire-In Split Phase Repeater

Enhanced over the original model, this PCS PulseWorx UPB Wired-In Split Phase Repeater, re-released in 2016, offers a simpler installation process to help you extend and amplify UPB communications more easily than ever. Designed for use in a home with a 120V/240V split-phase electrical system, the Split Phase Repeater works by repeating UPB commands transmitted on one phase (leg) of the electrical system onto the other phase (leg), and amplifying them by 150 percent. This allows UPB devices to communicate no matter where they are in your home. This Repeater installs in a junction box and wires into two phases (circuits), as well as the neutral of the circuit breaker panel. This upgraded model features four main improvements over the original model: Same size as wall switch models RWS, WS1DL-6, WS1R-15 to match. Fits in a single-gang box just like a wall switch dimmer. No longer requires junction box knockout. Offers convenient mounting points for secure installation. Configuration Details: Like all PulseWorx devices, the Split Phase Repeater can be initially configured using PCSâ€s free UPStart Setup Software tool. UPStart enables configuring such parameters as Network Name, Network ID, Unit ID, Room name, Device name, default on light levels, fade rates, LED colors, dimming d...

  • Brand: Powerline Control Systems (PCS)
  • ASIN: B002C7RG56
  • UPC: 811976011583
Similar Upb Module Results