BTECH AMP-V25 Amplifier for VHF (136-174MHz), 20-40W Output (2-6W Input), Analog and Digital Modes, Compatible with All Handheld Radios: BTECH, BaoFeng, Kenwood, Yaesu, ICOM, Motorola
BTECH AMP-V25 Amplifier for VHF (136-174MHz), 20-40W Output
Technical Details: Frequency range: ◦ AMP-V25 : 136 – 174 MHz Power supply: 13.8 VDC (15%), 5.5 A maximum Input RF power: 2 - 6W (10%) Output RF power: 20 - 40W Size: 5.5-in D x 4.5-in. W x 1.4-in. H (40 mm D x 115 mm W x 36 mm H) Net weight: 1.8 lbs. (800 g) The BTECH AMP-25 Series is designed to work with any BaoFeng or BTECH handheld transceivers, but it will also work with any handheld radio that outputs 2 W – 6 W with the appropriate cable. With the included Radio to Amplifier RF Cable, the amplifier will also work with Wouxun transceivers, some TYT transceivers, and some Kenwood transceivers. If the supplied cables do not connect to your radio, you will need to use adaptors or build cables with the appropriate connectors. Your BTECH AMP-25 amplifier does not include an antenna. It is very important to not transmit without an antenna or dummy load connected to the ANT connector on the rear panel of the amplifier. Transmitting without an antenna or dummy load may cause harm to the radio equipment. When choosing an antenna, make sure that it is suitable for the bands you plan on transmitting and receiving on. For example, if you plan on transmitting on 145MHz, make sure that the antenna you select has an SWR of 1.5:1 or less on that frequency. Using an antenna with...
- Color: Black
- Brand: BTECH
- ASIN: B076H972DH
- UPC: 722589228919
Skywalker Signature Series SKY38323 25dB Amplifier VHF/UHF/FM w/variable gain (SKY38323)
Skywalker Signature Series SKY38323 25dB Amplifier VHF/UHF/FM w/variable
The SKY38323 is designed to amplify or boost an off air TV signal. The unit has variable gain via a control on the front panel (up to 25dB of gain VHF frequencies 21db for UHF frequencies). The product has a metal case for durability and connections are made using standard F type connectors for the in/out ports. Contains a built in power supply that is designed to connect to a standard 120 volt/ 60hz AC outlet. An on/off status light is visible on the front panel. Features: Enjoy the control of variable gain (with up to 25dB of gain) in VHF / UHF / FM bands. Low operation interference and minimal noise production & adjustment gain control Bandwidth: 47-1000MHz || Maximum Input: VHF 40dB MV / UHF 20dB MV || Gain: VHF 25dB / UHF 21dB Heavy-duty metal housing with built-in mounting screw holes & power indicator light Please note: When using this product a proper signal path must be established. System With No Pre-Amplifier: The SKY38323 must be installed immediately before any distribution splitter that supplies signals to your TV's. The proper signal path is: Antenna> coax> amplifier> splitter> TV's. System With Pre-Amplifier: The SKY38323 must be installed after the power inserter that supplies voltage to your preamp. Failure to do this correctly will block the DC voltage from...
- Brand: Skywalker
- ASIN: B008UDF55E
- UPC: 610370581759
Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier
Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna
Winegard LNA-200 Boost XT TV Preamplifier, VHF UHF Amplifier Extend the range and signal quality of your non-amplified digital HDTV antenna with a Winegard TV antenna preamplifier. Winegard's ultra low-noise amplifiers offer maximum signal quality. Watch more free shows than ever before! Boost Clear Circuit Technology features the lowest noise figure (1 dB typical) to deliver more range and reduce signal dropout and pixelation. The Boost XT enhances any non-amplified antenna! TwinAmp Technology separately amplifies VHF and UHF signals. This separation of bands increases signal handling capability for up to 10 times more and reduces intermodulation, thereby maintaining the purest signal path possible. Size, Compatibility and Features Dimensions: 6in x 4in x 4.8in TwinAmp Technology separately amplifies VHF and UHF signals 10x more power handling Bandpass filters remove interfering RF signals Installs on any outdoor non-amplified TV antenna Maximum Gain (typical): 20 dB Noise Figure (typical): 1dB Power: +5V at 130mA In The Box LNA-200 Boost XT Preamplifier 110V Adapter, Power Inserter, Hose Clamps Printed Documentation Note: Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified. The TV channels available in your area dep...
- Color: Black
- Brand: Winegard
- ASIN: B00DQN3R9O
- UPC: 012301815429
Channel Master CM-3410 1-Port Ultra Mini Distribution Amplifier for Cable and Antenna Signals
Channel Master CM-3410 1-Port Ultra Mini Distribution Amplifier
Channel Master distribution amplifiers, manufactured by Channel Master's former parent company, PCT International, one of the leading manufacturers in the cable telecommunications industry, will boost your digital TV and HDTV signals, increasing their overall signal strength. They have a miniature design which will give you more space to relieve congested installs when space is at a premium. Channel Master distribution amplifiers are professional grade and meet stringent US and international standards, including those developed by the Society of Cable Telecommunications Engineers (SCTE), who creates international standards for many TV signal distribution products. Channel Master distribution amplifiers can be used in HDTV, CATV, off air, analog and digital RF distribution applications where high performance and reliability are required. The CM 3410 is a high quality ultra mini single output digital TV amplifier with passive return, which means the distribution amplifier does not have any amplification for signals in the return path frequency range (5 42 MHz). This frequency range is used in cable telecommunications networks to allow cable modems and set top boxes to communicate back through the cable network. Passive return amplifiers are the most commonly used in house distribut...
- Color: White
- Brand: Channel Master
- ASIN: B001FY0B90
- UPC: 749860022332
RM LA 145 85 Watts 2m amplifier (135-175 mhz) for Ham/Professional HT Radio
RM LA 145 85 Watts 2m amplifier (135-175
The LA 145 is a wideband compact amplifier for VHF band, covering from 135-175 Mhz. The RM LA-145 is a wideband compact FM/SSB amplifier for the VHF band; covering from 135-175Mhz. Output is nominal at full power (85w max) Input drive is from 0.5w to a maximum of 4w, ideally suited to low power handheld transceivers. Output power depends both on input power and frequency of use. Great performance , compact design, solid quality.
- Brand: RM43
- ASIN: B01LRZENZ4
- UPC: 095225145711
4 Port DTV Distribution Amplifier - CDA4
Antennas Direct ClearStream Juice VHF/UHF Preamplifier System
Antennas Direct ClearStream Juice VHF/UHF Preamplifier
Why do you need JUICE? Adding an amplifier to an antenna increases available signal strength. The extra JUICE will help overcome challenges including coaxial cables over 100ft, splitters, or weak signals in the area. This VHF / UHF preamplifier system offers ample gain and best-in-class overload protection for dependable reception in urban, suburban, or rural areas. The JUICE has an integrated low pass filter that rejects interference from cellular and wireless data services and offers maximum signal to noise for clean, efficient signals. As a leader in cutting-edge antenna technology, Antennas Direct is dedicated to providing superior products supported by a 90 day warranty and a world class call center located in St. Louis, MO. Includes JUICE VHF / UHF preamplifier, power supply, power inserter, 2/ea. x 36in coaxial cables, 2/ea. zip ties, and instructions.
- Color: BLACK
- Brand: Antennas Direct
- ASIN: B00SVV2O6S
- UPC: 631805468247
TC-VU50 140-150/430-440MHz VHF/UHF Dual Band Handheld Two Way Radio Power Amplifier 50W Output for Portable Walkie Talkie
TC-VU50 140-150/430-440MHz VHF/UHF Dual Band Handheld Two Way
Brand: HYS Model: TC-VU50 Frequency 140-150MHZ&430-440MHz Operate Supply voltage :12-14V Operate current:6-8Av Work required Input power:3-8W SSB model work requrid Input power:5-10W Please Note: Please operate amplifier according to the required current, voltage and input power. Mode:FM-SSB Amplifier narmally output power 35-45W, Max output power: 50.(According to input power and supply voltage/current) Output power SSB:100W PEP Max (Note:Normal the output power is 60-80W) Note:if you will test the max PE power to FM 50W or SSB 100w,you can try use input 8w(FM )/ 10w (SSB)from FM/SSB radio but please don't use too long time, the operate will cause damage to power transistor, more serious will cause the amplifier to burn out. Fuse 2x10A Size:2.4X 6.5X 6.7 inch Weight: 1500g Package inchlud : 1* TC-VU50 Power Amplifier(140-150MHZ&430-440MHz)
- Brand: TWAYRDIO
- ASIN: B07BLVDFSP
Eagle EASDISTAMP25GX 500256 Distamp 25GX 25dB Distribution Amplifier
Eagle EASDISTAMP25GX 500256 Distamp 25GX 25dB Distribution
High output Capability provides the Eagle Aspen 25 dB distribution amp lower distortion than its competitors. Featuring UHF VHF FM broadband, 25 dB gain 54 MHz - 215 MHz and 22 dB gain 475 MHz - 800 MHz, this amp is of exceptional quality.
- Color: SILVER
- Brand: Eagle
- ASIN: B0018BOJTS
- UPC: 115970926165
RM LA 144 70 Watts 2m amplifier (135-175 mhz) for Ham/Professional HT Radio
RM LA 144 70 Watts 2m amplifier (135-175
The LA 144 is a wideband compact amplifier for VHF band, covering from 135-175 Mhz. Output is a nominal 60 Watts at full power (70 Watts Max) Input Drive from 0.5 Watt to Maximum of 4 watts, ideally suited to low power handheld transceivers. Output power depends both on input power and frequency of use. The graph illustrates the relationship between two parameters.
- Brand: RM43
- ASIN: B01LRYKI5O
- UPC: 095225145704
Winegard LNA-100 Boost TV Antenna Amplifier, HDTV Signal Booster, HD Digital VHF UHF Amplifier, Indoor HDTV Ultra Low Noise Amp (USB Power Supply) - USA
Winegard LNA-100 Boost TV Antenna Amplifier, HDTV Signal
Winegard LNA-100 Boost Indoor Digital TV Antenna Amplifier The LNA-100 indoor amplifier increases range and delivers a crystal clear TV signal to HDTVs so viewers can get more broadcast TV channels in high definition than with an antenna alone. Using the latest advances in amplifier technology, Boost enhances any indoor non- amplified antenna, delivering more range and available channels. In The Box - LNA-100 Boost Indoor Digital TV Antenna Amplifier - USB Power Cable - 110V Adapter - Printed Documentation Size, Compatibility and Features - Dimensions: 8.5" x 0.8" x 1.5" - Boost any Non-Amplified TV Antenna - Minimize Pixelation and Dropouts - Receive More Channels - Gain (typical): 20 dB - Noise Figure (typical): 1dB - Power: +5V
- Color: White
- Brand: Winegard
- ASIN: B00BN5Z2UY
- UPC: 809387603237
HYS TC-AP01V (136-174Mhz) VHF Power Amplifier, OUTPUT POWER 20 - 30W(input Power 2-6W) Work for YAESU C4FM, KENWOOD D-STAR, ICOM/KENWOOD NXDN, Motorola Analog and Digital Modes Walkie Talkie
HYS TC-AP01V (136-174Mhz) VHF Power Amplifier, OUTPUT POWER
2-6W Radio Talk Range:3-5 miles(according to the specific environment and weather conditions). 2-6W VHF or UHF Handheld Radio Connect VHF or UHF Amplifier Talk Range:10-15 miles (according to the specific environment and weather conditions). What are you providing several connect cables and cable connector? Sma-male to sma-female, sma-male to sma-male, sma-male to BNC How to connect Motorola Walkie Talkies? RF ADAPTERS:BNC to MOTOROLA RADIOS ANTENNA PLUG, SMA-FEMALE to MOTOROLA RADIOS ANTENNA PLUG. How to hear sound from 2-6W walkie talkies or amplifier speaker? 2-6W walkie talkie is a transmission way for sound, the amplifier speaker is not a transmission way for sound. What is the antenna frequency,gain and power? How to connect? 144/430MHz, Max power: 100W. We will provide so239 to pl259 90 degree adapter, better to help you to use this amplifier and operating convenience. Frequency range: 136MHz-174MHz Voltage:DC 13.8V (±15%) Input RF power:2 - 6W (±10%)(Please confirm input power , especially baofeng radio) Output RF power:20 - 30W(Baofeng radio normal Output power about 15-30W) Current:4.0-5.5A Size:135*115*35mm High-power equipment: Please do not transmit without an antenna. This device built-in radiato, please do not touch when used for a long time. 2-6W Ham...
- Brand: HYS
- ASIN: B075QGLW8P
RF CATV UHF VHF ATSC TV Antenna Amplifier with 32dB Gain Boost
RF CATV UHF VHF ATSC TV Antenna Amplifier
Professional RF Coax TV Signal Booster With High 32dB Gain This high-gain RF coax antenna signal amplifier is designed to boost the RF coax TV signal from cable outlet, digital/analog TV antenna, CCTV DVR or MATV system to greater distance with the original signal quality retained all the way. High Gain 32-dB Boost This unit is featured with high 32 dB gain for all the RF input signals, which literally means that the amplifier can help boost RF coax signal for more than 1300FT or 400m if RF TV source signals have 70 to 75dB strength to start with. Also served as a great solution for fixing the problems of noise, snowy picture, interference and weakness after distribution for CATV, Digital TV systems and CCTV systems. Easy Gain Control The variable gain dial on this amplifier provides a variable attenuation control for reducing the possibility of over driving and get best performance. This great adjustment feature is very handy for installer to obtain the best setting of RF signal and for simple, quick signal level balancing and installation. Proper gain level can greatly enhance the picture quality with minimum noise and reduce noises found in existing RF cable setup. Easy Slope Control When installer has a large RF system to run or multi-transmission by one coaxial cable, ...
- Brand: AllAboutAdapters
- ASIN: B06ZZ8DVNK
GE Outdoor TV Antenna Amplifier, HD TV Digital VHF UHF, Low Noise, Antenna Signal Booster, Coax Connections, Mounting Hardware Included, Black, 42179
GE Outdoor TV Antenna Amplifier, HD TV Digital
A better signal mean better TV with the GE outdoor antenna amplifier. Increase your reception quality by strengthening the signal from channels in your area. Low-noise amplification improves Signal-to-Noise ratio and compensates for cable loss to offer a superior viewing experience. It reduces signal dropouts and features input and output coax connections making it compatible with a wide range of antenna brands and models. Seeing is believing with the GE outdoor antenna amplifier.
- Color: Amplifier | Outdoor
- Brand: GE
- ASIN: B07NF7WLY6
- UPC: 030878421799
FASTROHY 50-4000MHz RF Low Noise Amplifier SPF5189 0.6dB Wide Band Amplifier Signal Receiver for FM HF VHF/UHF Ham Radio
FASTROHY 50-4000MHz RF Low Noise Amplifier SPF5189 0.6dB
Features: This RF Amplifier features low noise figure, is a LNA RF Amplifier. Generally used as a high frequency or intermediate frequency preamplifier for a wide range of radio receivers, as well as amplifying circuits of highly sensitive electronic detection devices. In the case of amplifying weak signal, the noise of the amplifier itself may be very serious, so it is hoped that this noise will be reduced to improve the signal-to-noise ratio of the output. Application: LNA for the main mobile communication base station infrastructure applications, such as wireless communication transceiver card, tower mounted amplifier (TMA), combiner, Repeaters, and distal/digital wireless wide band end equipment application design. This RF low noise amplifier LNA is 50-4000MHz, NF = 0.6dB. Specifications: LNA:50-4000mhz NF:SPF5189Z LNA0:0.6 dB Amplifier: FM Size:34 x 25mm/1.33 x1.0inch Weight:10g Package Included: 1 x LNA 50-4000MHz SPF5189 RF Amplifier
- Color: As the picture show
- Brand: FASTROHY
- ASIN: B07JPJJ52G
- UPC: 645688827442