Performance Tool W2935 Wire Insertion Tool, Piercing

Performance Tool W2935 Wire Insertion Tool,

Stainless steel tube and hollow handle aids in installing wires for radios, alarms and electronic equipment. Feed wires safely through the firewall grommet, allowing them to be accessed from the opposite side. Grommet punch simplifies the task without fishing a wire through an unseen hole made with an awl. Comfort tri-grip handle aids in piercing firewall grommets.

  • Brand: Performance Tool
  • ASIN: B073WZCL8Q
  • UPC: 039564127311

Lisle 61030 2-Piece Wire Inserter Combo Set

Lisle 61030 2-Piece Wire Inserter Combo

Includes 1/4" O.D. and 3/8" O.D. Wire Insertion Tools for Use When Installing Wires for Audio Electronics, Aftermarket Lighting, Alarm Systems and Much More.

  • Color: Regular
  • Brand: Lisle
  • ASIN: B00IXSECT6
  • UPC: 083045610304

5 Piece Wire Loom Cable Insertion Tool Set for 3/8" to 2"

5 Piece Wire Loom Cable Insertion Tool Set

Wire Loom Cable Insertion Tool Set of 5 for 3/8" to 2"

  • Color: 1 Unit
  • Brand: Electriduct
  • ASIN: B00OKXP0C6
  • UPC: 082045466263

OTC 4462 Wire Loom Threading Kit

OTC 4462 Wire Loom Threading

The OTC wire loom threading kit is a clever grouping of wire fishing tools for the automotive technician. Whether general wiring R&R - or adding gauge packs, sound systems, vehicle security and camera systems, these tools simplify placing the wiring within the protection of existing wiring looms, without cutting tape or zip ties and without damage to other wires. There are 3 wire pulling tools in 15", 10" and 5.5" lengths for common automotive applications, the grommet insertion tool allows the wire to be captured within the tool to hold once it is placed so you can grab from the opposite side of the firewall and the pigtail tool assists when building a new harness on the workbench. Proper wiring repair or added wiring should be protected from scuffing, tearing, heat, or road grime by secure placement within wire looms or through grommet holes. To do the job right, the looms should be opened, requiring removal of zip ties, and tape; then the wire pressed into the wire looms, and re-secured. This kit lets you complete the task without removing these ties or tapes and saves a lot of wear and tear on your fingers. Kit contains 5 Pieces for any automotive service situation; 3 pieces for threading a wire into populated looms, 1 piece for inserting wire through grommet holes and 1 piec...

  • Brand: OTC
  • ASIN: B00IAQ1Q54
  • UPC: 731413575112

Wire Stripper/Cutter, 22-30 AWG Solid Wire Klein Tools 11047

Wire Stripper/Cutter, 22-30 AWG Solid Wire Klein Tools

The Klein Tools Wire Stripper/Cutter is a compact and lightweight tool for your stripping and cutting needs. Made from hardened steel for strength, it cuts, strips, loops and bends solid wire. The narrow nose reaches into confined spaces. Strips and cuts 22-30 AWG solid wire. Hardened steel construction with black oxide finish. Lightweight tool has narrow nose that fits into tight places. Wire looping and bending holes. Bi-layer handles provides added structure, superior palm-fit and comfort. Shear-type cutting blades for clean cuts. Black-oxide finish resists corrosion. Do not use for cutting steel wire or bolts. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make grea...

  • Color: Yellow
  • Brand: Klein Tools
  • ASIN: B000I1L7GW
  • UPC: 640025000083

JEGS Performance Products W2935 Wire Insertion Tool Piercing Tip 4 Stainless Ste

JEGS Performance Products W2935 Wire Insertion Tool Piercing

Wire Insertion ToolPiercing Tip4" Stainless Steel Tube4" Tri-Grip Handle1/4" Wiring Hole Diameter

  • Brand: JEGS
  • ASIN: B07952TMXL
  • UPC: 889944000761

InstallerParts D-Sub Pin Insertion/Extraction Tool

InstallerParts D-Sub Pin Insertion/Extraction

D-Sub Pin Insertion/Extraction Tool

  • Brand: InstallerParts
  • ASIN: B008NXJHI2
  • UPC: 741459785178

WESTONETEK Punch Down Impact Tool with 110 and 66 Blades, Network Wire Cable Cat6/Cat5e Telephone Impact Terminal Insertion Tools

WESTONETEK Punch Down Impact Tool with 110 and

With 110 and 66 blades that are interchangeable and reversible, the professional punch down tool can inserts and cuts terminations in one operation. Adjustable high and low actuation setting accommodates termination requirements or user preference. With spare storage that helps prevent blade loss, the precision blades are conveniently interchangeable and reversible between 110 and 66 blades. The punch down tool offers reliable, easy-to-use operation at an affordable price. This handy 110 type punch-down impact tool is spring-loaded for connecting blocks and keystone jacks. The twist and lock socket accommodates 110 or other common blades. The impact adjustment dial adjusts the force of the spring-action from low to high to meet different installation applications. Package Includes: 1 x Punch Down Tool 2 x Blades 1 x Wire Stripper Note: Adjustable impact-force settings (Lo/Hi) can be used for various cable termination applications. If after used a while the entry of the blaze is loose, you can use the impact- force settings to adjust it. (This also means that when it is not loose, the setting is not adjustable.)

  • Brand: WESTONETEK
  • ASIN: B06Y579HRQ
  • UPC: 606993600588

AMPHENOL INDUSTRIAL M81969/14-01 INSERTION / EXTRACTION TOOL by AMPHENOL INDUSTRIAL

AMPHENOL INDUSTRIAL M81969/14-01 INSERTION / EXTRACTION TOOL by

  • ASIN: B0186ILTIY
  • UPC: 785533006902

Crimping Tool For Heat Shrink Connectors - Ratcheting Wire Crimper - Crimping Pliers - Ratchet Terminal Crimper - Wire Crimp Tool by Wirefy

Crimping Tool For Heat Shrink Connectors - Ratcheting

Wirefy professional grade crimping tool (for heat shrink connectors) has a smooth and efficient ratcheting mechanism that creates uniform and rock-solid crimps.  Electrical wiring DIY enthusiasts, as well as professional electricians will be impressed with the outstanding quality and high performance of these wire crimpers. Heat shrink terminals are crimped by squeezing the handle through a complete cycle until the handle releases automatically. Precise ratcheting mechanism will ensure the same amount of crimping force for all your crimps. Professional grade crimping die (designed for heat shrink connectors) will ensure strong and durable crimps every time. The tool has a star wheel to adjust the crimping force with (+) and (-) indicators. The minus (-) direction provides higher crimp height (less crimping force), while the plus (+) direction decreases the crimp height (more crimping force). There is a handle release lever on the lower handle. When moved toward the jaws, the lever activates the release mechanism and opens the jaws. Wirefy offers lifetime warranty for our crimping tools. If you have any issues during the lifetime of your crimper, just let us know. Our stellar customer experience team will work with you to make sure you always have the highest quality crimping t...

  • Brand: Wirefy
  • ASIN: B07GFXHH91
  • UPC: 857409007099

Aucas KRONE KD-1 Professional Telecom Phone Cable Cat5 RJ11 RJ45 Network Punch Down Impact Network Tool Wire Cut Tool Insertion

Aucas KRONE KD-1 Professional Telecom Phone Cable Cat5

Description: This is a punchdown tool for putting wires into sockets, patch panels or outlets. And blades precisely insert and trim wire. It is the only tool you need to add, change or remove wires from connections. Brand new and high quality Durable punch down tool, makes network installation easy A specially-designed wire hook removes terminated conductors A blade helps to easily remove the blocks from back mount frames Universal scissors cut a variety of cable types, including 20 AWG to 26 AWG, and type 1 foam-insulated conductors Can be used on shielded or unshielded twisted pair cables to 100/ keystone jacks Package included : 1x NEW KRONE Telecom Phone Punch Down Tool

  • Brand: Aucas
  • ASIN: B07149Y21T
  • UPC: 756244939858

8MILELAKE 7pc Professional Windshield Removal Automotive Wind Glass Remover Tool Kit

8MILELAKE 7pc Professional Windshield Removal Automotive Wind Glass

Heavy duty Windshield removal tool kit Kit includes: 1. Wire: Three strong galvanised steel wires braided to form one wire. 2. 2 x Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held. 3. Windshield removal tool: Cuts the vinyl adhesive compound around the windshield. 4. Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield. 5. Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.

  • Brand: 8MILELAKE
  • ASIN: B01KT0VBCG
  • UPC: 614019644874

IDC Insertion Tool with Stripper for Network UTP/STP/FTP Ethernet Cables & Leads by Tekit

IDC Insertion Tool with Stripper for Network UTP/STP/FTP

This is a plastic IDC Telecom/ Network UTP/STP Cable Cutter Stripper tool with metal blade for longevity of the tool and wire stripper. For terminating telephone/data sockets so you can install your own extensions. It is very simple to use and perfect for those DIY jobs.

  • Color: yellow
  • Brand: Jugtech
  • ASIN: B00H79KNLI

VEAM 11/7345 Insertion Tool, VEAM 16AWG Wire Size Circular Connectors

VEAM 11/7345 Insertion Tool, VEAM 16AWG Wire Size

  • ASIN: B079B8JGKS
  • UPC: 653958390541

Jonard FT-6 Flaring and Insertion Tool, 4-1/4" Length

Jonard FT-6 Flaring and Insertion Tool, 4-1/4"

The flaring end of the tool facilitates the expansion of the cable providing easier insertion of "F" connectors. The insertion end makes "F" connector insertion fast and easy, even in cold weather. This tool is recommended for use on polyethylene jacketed cables and plenum cables, and is especially helpful when using tri-shield and quad-shield cables. 4-1/4" long.

  • Brand: Jonard Tools
  • ASIN: B006C3YP96
  • UPC: 811490012387
Similar Wire Insertion Tool Results